FreeTender
Accepting bidstenderUnited States

Gooseneck Platform & Install — Earth Moving and Excavating Equipment

Issued by AGRICULTURE, DEPARTMENT OF · FOREST SERVICE · USDA-FS, CSA SOUTHWEST 1 · via SAM.gov — US federal contract opportunities

Verify & apply on the official portal →
Published
4 Sept 2026
Closes
11 Sept 2026, 21:00 UTC
Reference
127EAY26Q0134
Location
CA, United States
Sector
Manufacturing & Supply

Details

AGRICULTURE, DEPARTMENT OF · FOREST SERVICE · USDA-FS, CSA SOUTHWEST 1 is soliciting Gooseneck Platform & Install — Earth Moving and Excavating Equipment. Solicitation number 127EAY26Q0134 . Classified under NAICS 336212 — Truck Trailer Manufacturing. Product/service code 3805 — EARTH MOVING AND EXCAVATING EQUIPMENT. Place of performance: CA, USA. Responses are due by 11 September 2026 21:00 UTC. Posted on SAM.gov, the US federal contract opportunities system; registration is required to bid.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12.  This announcement constitutes the only solicitation.  Offers are being requested and a separate written solicitation will not be issued. Solicitation number 127EAY26Q0134 is issued as a Request for Quotation (RFQ) for Gooseneck Platform Purchase and Install. This acquisition  is set-aside for small business concerns.  The applicable North American Industry Classification Standard Code is 336212  The small business size standard is 1,000.  This acquisition is a Total Small Business Set-Aside.  All responsible sources may submit a quotation which will be considered by the agency. Statement of Requirement The Lassen National Forest requires the purchase and install of a Gooseneck Platform in accordance with the specifications listed in Appendix A – Specifications. Appendix A – Specifications Gooseneck Platform PGTD 94 9’4” Lassen NF EN 2862 Location 1301 Fifth St. Susanville, CA Vehicle Information 2024 F-450 DRW

Vin: 1FDTF4HT4REC97545

Wheelbase: 145.3”

  • Overall Dimensions: 9’4” Long x 96” Wide
  • Platform Floor: 1/8” Tread Plate
  • Cross sills (16”spc.): 3.0” 12Ga Formed
  • Long sills (34”spc.) 4” Formed Channel
  • 3/8” Rub Rail Each Side
  • Formed Rear Skirt 12Ga. With 1/8” Tread Plate Step Bumper
  • Turnover Ball Hitch Rated at 30,000 lbs. Maximum Groos Trailer Weight
  • Spring Loaded Chain Retainers Built into Floor and 2-5/16” Ball
  • Complete Undercoating
  • Platform Finish Paint-Oven Cured Black Paint
  • Bulkhead with Tapered Design 42.63” High Installed
  • Platform Lights: Oval Stop/Turn/Tail and Back Up Lights
  • (2) White LED Back Up Lights in Bulkhead
  • (2) Red LED Stop/Turn/Taillights in Bulkhead
  • Led Combination Stop/Turn/Tail and Backup Lights at Rear
  • Clearance Lights: Sealed Round Lights
  • (2) Amber Front Clearence Lights
  • (2) Red LED Rear side Markers Lights
  • (2) Red LED Rear Clearance Lights
  • 3 Red LED RID Lights
  • Trailer Wiring 7-Way Plug Locates in Rear Skirt
  • Side Skirts with Integrated Vertical Compartments
  • Compartment Include Vertical Doors, NXG Rotary Latches
  • Front Compartment: 36” High x 29.5” Long x 18.75” Deep
  • Middle Compartment: 9.23” High x 63” Long x 18.75” Deep
  • Rear Compartment: 21” High x 24” Long x 18.75 Deep
  • 12” Slam Tailgate
  • Shelf, (2) Each Front Compartment
  • Flip Top Dividers (8)
  • Shelf Dividers (12)
  • Rear Receiver Bumper Pull Trailer Hitch
  • Cargo D-Rings

Contact: [contact details removed]

Price to include installation

Context for bidders

We hold 2 notices from AGRICULTURE, DEPARTMENT OF · FOREST SERVICE · USDA-FS, CSA SOUTHWEST 1, going back to September 2026 — 2 of them still open. There are 541 open Manufacturing & Supply tenders in United States. This one closes in 7 days.

Before you bid on this tender

A quick checklist to help you decide whether to bid and prepare a compliant submission for this manufacturing & supply opportunity. Always verify the details on the official source.

  • Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
  • Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
  • Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
  • Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
  • Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
  • Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.
Common bidding mistakes to avoid →Writing a winning proposal

More Manufacturing & Supply tenders

All Manufacturing & Supply tenders →

FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.

Verify & apply on the official portal →