Duaringa SES Generator Fencing

Central Highlands Regional Council requires a galvanised steel fence and swing gate to be installed around the Duaringa SES Shed and Generator.

Projected to be completed by end of December 2026. Please attempt to tie in with other works in the general area to save mobilisation or other costs.

Delivery address: Duaringa SES Shed, 19 Mary Street, Duaringa QLD 4712

The other evaluation criteria that will be used to evaluate offers are:

1. Conformance to requirements (10%)

2. Capability and Experience (10%)

3. Ability to meet the timeframes (10%)

4. Cost and Value for Money (50%)

5. Minimise Mobilisation – Tie in with other local work (10%)

6. Development of Competitive Local Business and Industry (10%)

Background information / Compatibility requirements

1. Fence Dimensions and Materials

• Supply and install a galvanised steel fence and chain wire mesh enclosure measuring 4.5 metres wide x 7.5 metres long.

• Total fence perimeter: 24.00 linear metres, including gate opening.

• Overall fence height: 2400 mm.

• 2400 mm high galvanised steel posts.

• 1800 mm high galvanised chain wire mesh.

• Three (3) strands of barbed wire across the top of the fence.

• 50 mm diamond mesh.

• 2.5 mm or 3.15 mm galvanised wire.

• Galvanised steel posts to be concreted into the ground to a minimum depth of 600 mm.

• Galvanised steel posts to have galvanised steel post caps.

• All works are to comply with CMDG-G-11 Drawing (Layout1)

2. Swing Gate Requirements

• Supply and install, suitable for pedestrian access.

• Gate to match the adjoining fence construction, including galvanised steel framework and 50 mm diamond chain wire mesh.

• Gate height to be 1800 mm with three (3) strands of barbed wire above, where compliant with applicable safety requirements.

• Gate to include heavy-duty galvanised hinges, suitable latch and provision for padlocking.

• Gate posts to be appropriately sized and securely concreted into the ground to a minimum depth of 800 mm, with footing dimensions suitable for the gate load and ground conditions.

• Gate to swing freely and operate smoothly without obstruction.

• Gate location and swing direction to be confirmed with Council prior to installation.

3. Gate Hinges and Locking Requirements

• All double swing gates and single pedestrian access gates shall be fitted with heavy-duty galvanised steel hinges and lockable gate hardware suitable for security fencing.

• Hinges shall be tamper-resistant and designed to prevent unauthorised removal of the gate when closed and locked.

• All gates shall be fitted with a heavy-duty galvanised steel latch and lockable hasp or equivalent locking arrangement suitable for a Council-supplied padlock.

• Double swing gates shall include galvanised steel drop bolts to secure the inactive gate leaf in the closed position.

• Gate hinges and locking mechanisms shall be suitable for external conditions, corrosion-resistant and capable of withstanding regular use.

• All gates shall open and close smoothly without binding or sagging and shall be securely lockable in the closed position.

• All gate hardware and fittings shall comply with CMDG Standard Drawing CMDG-G-011 Revision F, where applicable.

Safety and Site Requirements

• Contractor to provide safe temporary barricading of the work area, restricting public access in accordance with relevant legislation and Codes of Practice.

• All workers must be registered on Council's LinkSafe (Safety Management) Program.

• Contractor must adhere to all Council Safety and Management Systems, Policies and Procedures.

• Contractor must ensure all work areas are maintained in a safe condition throughout the works.

• Ensure all work areas are left clean and tidy upon completion, including the removal and lawful disposal of all waste materials and debris.

4. Contract and Pricing Requirements

• The Contract Price will be a fixed lump sum amount.

• The Contract Price is deemed to include all labour, materials, plant, equipment, excavation, concrete footings, fencing, swing gate, gate hardware, installation, waste removal and all other provisions and requirements specified in the RFQ/Scope of Work.

• No costs associated with additional works will be accepted by Council without prior written approval from Council.

Buyer: Central Highlands Regional Council

Buyer location: 65 Egerton St, Emerald, Queensland 4720, Australia

VendorPanel reference: VP531400

Buyer's reference: RFQ260269

Opens: Friday 30 October 2026 (E. Australia Standard Time)

Closes: Friday 13 November 2026 02:00 PM (E. Australia Standard Time)

Supplier query cut-off: Tuesday 10 November 2026 02:00 PM (E. Australia Standard Time)

Expected decision: Friday 20 November 2026 (E. Australia Standard Time)

Categories: Building Trade & Repairs & Maintenance Services; 1: Fencing; Construction & Operation; 1: Fencing Supplies & Services

Regions of service: Queensland; 1: Fitzroy; All Regions of Service locations are within Australia.

Tender documents: 5

Published on VendorPanel Public Tenders. Documents and responses require free VendorPanel supplier registration.