Cylinders — Miscellaneous Power Transmission Equipment

DEPT OF DEFENSE · DEPT OF THE ARMY · AMC · ACC · MISSION & INSTALLATION CONTRACTING COMMAND · 419TH CSB · W6QM MICC-FT DRUM is soliciting Cylinders — Miscellaneous Power Transmission Equipment. Solicitation number W911S227U0134. Classified under NAICS 333995 — Fluid Power Cylinder and Actuator Manufacturing. Product/service code 3040 — MISCELLANEOUS POWER TRANSMISSION EQUIPMENT. Responses are due by 13 November 2026 20:00 UTC. Posted on SAM.gov, the US federal contract opportunities system; registration is required to bid.

Salient Characteristics Rods and Assembly FINALThe Government requires the following new, unused industrial fluid-power components (or equal) for machine-shop use. Items must meet or exceed these essential physical, functional, and performance characteristics. Offers of equal items must clearly demonstrate interchangeability, mounting compatibility, pressure/flow ratings, and dimensional equivalence. Delivery is required by NLT dates listed below with requirement(s).CLIN 0001 - Rotary Actuators (Qty: 3 EA)Type: Rotary actuator (S74 series or equivalent)Operating pressure: 1,000 PSIConfiguration equivalent to S74DC-74-180 (double-acting, specified rotation/mounting)Must be suitable for industrial hydraulic service and compatible with existing plant machineryRequired delivery: 7 December 2026CLIN 0002 - Pneumatic Cylinders (Qty: 6 EA)Type: Pneumatic linear cylinder (LPM series or equivalent)Bore: 3.00 inchesStroke: 1.00 inchConfiguration equivalent to 3.004RLPM91.00Required delivery: 7 December 2026CLIN 0003 - Hydraulic Motor Assemblies (Qty: 6 EA)Type: Hydraulic motor assembly (PMD type or equivalent)Configuration equivalent to TE0230C5100AAAARequired delivery: 7 December 2026Common requirements for all itemsNew manufacture only (no used, surplus, or refurbished)Manufacturers standard commercial warrantyFOB Destination, McAlester Army Ammunition Plant, Building 9 Machine Shop, McAlester, OK 74501All items must be packaged for protection against damage, corrosion, and contamination during shipment and storageThese characteristics represent the minimum essential features needed for form, fit, and function. Vendors offering [or equal] products must provide technical data (catalog cuts, drawings, or specifications) demonstrating compliance.Salient Characteristics The Government requires three (3) new, unused heavy-duty industrial hydraulic cylinders (or equal) that meet or exceed the following essential characteristics for form, fit, and function. Offers of [or equal] items must include complete technical data (catalog cuts, drawings, or specifications) demonstrating interchangeability, mounting compatibility, pressure rating, and dimensional equivalence.CLIN 0004 Item Description (Qty: 3 EA)Type: Heavy-duty industrial hydraulic cylinder, Parker Hannifin Series 2H (or equal)Bore diameter: 4.00 inchesStroke length: 12.00 inchesNominal operating pressure: 3,000 PSIMounting style: Side lug (NFPA MS2) equivalent to the specified configurationFull configuration equivalent to Parker model 4.00CSB2HHNAT119AC12.00 (includes the specific rod diameter/code, porting, seals, cushions, and other features of this catalog number)Must be suitable for industrial hydraulic service and compatible with existing plant machineryAdditional Requirements (all items)New manufacture only (no used, surplus, or refurbished material)Manufacturers standard commercial warrantyFOB Destination: McAlester Army Ammunition Plant, Building 8, McAlester, OK 74501Required delivery: NLT 18 November 2026Proper packaging to protect against damage, corrosion, and contamination during shipment and storageThese characteristics represent the minimum essential features needed. Vendors offering equivalent products must clearly demonstrate that their cylinders meet or exceed all listed performance, dimensional, and mounting requirements.Salient Characteristics The Government requires the following new, unused industrial hydraulic cylinder and associated mounting hardware (or equal) for machine-shop use at McAlester Army Ammunition Plant. Offers of [or equal] items must include complete technical data demonstrating form, fit, function, interchangeability, mounting compatibility, pressure/load ratings, and dimensional equivalence with the specified Parker Hannifin parts. All items must be suitable for industrial hydraulic service.CLIN 0005 - Hydraulic Cylinder (Qty: 3 EA)Type: Heavy-duty industrial hydraulic cylinder, Parker Hannifin Series 2H (or equal)Bore: 3.25 inches (3-1/4inch)Stroke: 12.00 inchesOperating pressure: 3,000 PSIMounting: Side lug (NFPA MS2) equivalent to configuration 3.25CSB2HHNAT119AC12.000 (includes specified rod, ports, seals, and cushions)Required delivery: NLT 17 November 2026CLIN 0006 - Spherical Rod Eye (Qty: 3 EA)Parker P/N 0961000138 (0138 / RES-13 or equal)Hole diameter (CD): 1.375 inches (1-3/8inch)Thread (KK): 1-1/4inch-12Load rating: approximately 28,600 lbs (tension, 4:1 design factor)Must be SB-style alignment accessory compatible with Series 2H cylindersCLIN 0007 - Clevis Bracket (Qty: 3 EA)Parker P/N 0839500000 (SB 0137 or equal)Must match the 0138 spherical rod eye for proper mounting and alignmentCLIN 0008 - Spherical Rod Eye (Qty: 3 EA)Parker P/N 0961000100 (0100 or equal)Must be dimensionally and functionally interchangeable with the specified Parker spherical rod eye for the companion cylinder/rod sizeCLIN 0009 - Pivot Pin Assembly (Qty: 3 EA)Parker P/N 0839640000 (1inch Pivot Pin Assembly or equal)1-inch pivot pin, complete assembly, compatible with the associated clevis/rod-eye hardwareCommon requirements for all itemsNew manufacture only (no used, surplus, or refurbished)Manufacturers standard commercial warrantyFOB Destination: McAlester Army Ammunition Plant, 1 C-Tree Road, Building 8, McAlester, OK 74501Required delivery: NLT 17 November 2026Proper packaging to protect against damage, corrosion, and contaminationThese characteristics represent the minimum essential features needed. Vendors offering equivalent products must clearly demonstrate that their items meet or exceed all listed performance, dimensional, threading, load, and mounting requirements for interchangeability with the specified Parker Series 2H cylinder and accessories.