FreeTender
Accepting bidsrfpRussia

закупка Слесарного инструмента для нужд ООО "ГПМ Верхне Менкече".

Purchase of a locksmith tool for the needs of GPM Upper Menkeche LLC.English, machine translated

Issued by Общество с ограниченной ответственностью "ГЕОПРОМАЙНИНГ" · via Russia — B2B-Center commercial procurement (via B2B-Center/OTC aggregator)

Published
18 Nov 2026
Closes
25 Nov 2026, 14:00 UTC
Reference
4687051
Location
Москва, Russia
Sector
Electrical Equipment

At a glance

Общество с ограниченной ответственностью "ГЕОПРОМАЙНИНГ" in Russia has published a request for proposals in electrical equipment: “закупка Слесарного инструмента для нужд ООО "ГПМ Верхне Менкече".”. Submissions close on 25 November 2026, 7 days from today. Quote reference 4687051 in any correspondence with the buyer. FreeTender has recorded 85 notices from this buyer since 2026, 10 of them currently open. There are 2,296 open electrical equipment notices in Russia on FreeTender. Bids are submitted to the buyer through Russia — B2B-Center commercial procurement (via B2B-Center/OTC aggregator), not through FreeTender.

English summary

Machine translated from Russian by FreeTender. The original notice below is the binding text.

RUVMN-4370, the purchase of a locksmith tool for the needs of OOO "GPM Verkhne Menkeche". Subject matter of procurement: Plywood 20 mm, 12 m2 Electric board 1 mm, 3 m2 3. Glue 88, 30 kg LB-52U (5 kg); 2.6 mm) KOBELCO, 50 kg 5.Adhesive 88 in jars 1 kg, 10 kg 6. Set of cams for the cartridge 250 mm with landing GOST 26651-85 type Camlock No8 (DIN 55029 Camlock D 1-8) for the car-screwing machine model TM-500M.1000, 2 sets 7 Tour 2x2 Tower, 16 Composite 8. Forest construction 2x3x2 (set - rigili, decking, koshin, stretch marks), 10 complexes 9.

Details

RUVMN-4370, закупка Слесарного инструмента для нужд ООО "ГПМ Верхне Менкече".

Объект закупки:

1. Фанера влагостойкая 20 мм, 12 м2

2. Электрокартон 1 мм, 3 м2

3. Клей 88, 30 кг

4. Электрод LB-52U (5 кг; 2.6 мм) KOBELCO, 50 кг

5. Клей 88 в банках 1 кг, 10 кг

6. Комплект кулачков для патрона 250 мм с посадкой ГОСТ 26651-85 тип Кэмлокк №8 (DIN 55029 Camlock D 1-8) длятокарно-винторезного станка модели ТМ-500М.1000, 2 компл

7. Вышка Тур 2х2, 16 компл

8. Леса строительные 2х3х2 (комплект - ригили, настилы, укосины, растяжки), 10 компл

9. Ключ серповидный со штифтом (3/4" ~ 2", Размер гайки 19-50 мм), 2 компл

10. Ключ серповидный со штифтом (3/4" ~ 2", Размер гайки 19-50 мм), 2 компл

11. Плазменная резка Lincoln Electric TOMAHAWK 1538, 2 компл

12. Олеиновая кислота 1 л, 5 л; дм3

13. Смазочно-охлаждающая жидкость СОЖ (концентрат 1:10) 10 л., 20 л; дм3

14. Рукав маслобензостойкий Ду 40, 300 м

15. Шланг химическистойки усиленый, прозрачный G1/2, 400 м

16. Набор водостойкой наждачной бумаги 140x115мм, 30 набор

17. Набор пасты ГОИ Connector крем шлифовально - полировальный № 1, 2, 3, 4, 2 набор 18. Набор для капиллярного контроля Инспектор от -10 до +50 LDN, CLN, PRN LDNCLNPRN, 3 набор 19. Набор инструментов JCB ударных,15 предметов 1 6 граней (36,41,46,50,55,60,65,70,75,80мм),в метал. кейсе JCB-8141-5MPB(64927), 2 набор

20. Набор комбинированных ключей STAYER ТЕХНО 27094-H8, 10 набор

21. Термостойкий мелок АЛЬФА-НДТ (тальк +2000 градусов) белый, набор 20 шт., 10 набор

22. шнур капроновый 1 мм, 10 рул

23. Набор лезвий 10 шт, 25 мм, сталь 60 ULTIMA 119046, 20 упак

24. Бита (5 шт; PH2; 50 мм) Inforce 11-01-292, 10 упак

25. Набор бит (Ph2; 70 мм, сталь S2) 10 шт. GROSS 11262, 10 упак

26. Бита с торцевой головкой 10х48 мм, 10 шт WURZ 4810, 3 упак

27. Бита с торцевой головкой магнитная (8 мм; 45 мм) 2 шт. MATRIX 11569, 2 упак

28. Алмазный брусок для выравнивания заточных кругов, 1 шт

29. Гайковерт аккумуляторный, 2 шт

30. Круг зачистной по металлу (230х6х22 мм), 300 шт

31. Универсальная смазка WD-40 400 мл., 38 шт

32. Насадка-круг войлочный для дрели 100х20 мм, 2 шт

33. Производственная тара для хранения стружки, опилок, обрезков. 1 м3 (с открывающимся дном), 1 шт

34. Распашной производственный контейнер(тара) 1.5м3, 1 шт

35. Износостойкий кампаунд для ремонта проточной части насосного оборудования, ведро 5 кг, 3 шт 36. Безусадочная смесь, быстросохнущая, для ремонта железобетонных оснований типа ЭМАКА, мешок 25 кг, 10 шт 37. Трубка гибкая с круглым соплом и вентилем JT-C3/8 450 мм, G3/8", для подачи СОЖ, 2 шт

38. Центр вращающийся КМ-5 с 7 сменными насадками D435, 1 шт

39. Центр вращения №5 грибковый D=250 мм TORNERI, 1 шт

40. Зенковка к/х 40 мм, 60 градусов, Р6М5, 1 шт

… всего позиций: 161

Закон: Коммерческие. Способ закупки: Запрос предложений. Площадка: Система электронных торгов B2B-Center. Организатор: Общество с ограниченной ответственностью "ГЕОПРОМАЙНИНГ". Приём заявок до: 25.11.2026 17:00 (МСК).

Страница процедуры на площадке: https://www.b2b-center.ru/app/market-next/ruvmn-4370-zakupka-slesarnogo-instrumenta-dlia-nuzhd-ooo-gpm-verkhne/tender-4687051/

Context for bidders

We hold 85 notices from Общество с ограниченной ответственностью "ГЕОПРОМАЙНИНГ", going back to October 2026 — 10 of them still open. They buy mostly in Manufacturing & Supply, Mining & Metals and Electrical Equipment. There are 2,296 open Electrical Equipment tenders in Russia. This one closes in 7 days.

More from this buyer

Explore Russia

Before you bid on this tender

A quick checklist to help you decide whether to bid and prepare a compliant submission for this electrical equipment opportunity. Always verify the details on the official source.

  • Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
  • Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
  • Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
  • Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
  • Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
  • Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.

More Electrical Equipment tenders

All Electrical Equipment tenders →

FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.

Verify & apply on the official portal →