Technical Maturity Analysis and Maturation Plan Development
Issued by Department of Industry, Science and Resources · via AusTender — Australian Government ATMs
- Published
- 30 Sept 2026
- Closes
- 21 Oct 2026, 04:00 UTC
- Reference
- ATM_2026_3664
- Location
- ACT, NSW, VIC, SA, WA, QLD, NT, TAS, Overseas, Australia
- Sector
- Water & Environment
Details
The Australian Radioactive Waste Agency (ARWA) is responsible for the management, safe storage and disposal of Australia’s radioactive waste. ARWA is undertaking a comprehensive technical program to support the development of long-term radioactive waste management solutions for Australia. ARWA is responsible for implementing a program of R&D to progress technologies which are relevant to the disposal of both low and high-activity wastes to the point where they are ready for deployment. This scope of work is intended to validate previous ARWA TRL assessments, identify any Critical Technology Elements (CTEs) with considerations for inclusion of higher-activity waste streams, deliver a workshop to assess the maturity of those CTEs, and finally to develop maturation plans to progress these technologies to an acceptable readiness level.
Conditions for Participation
- The Tenderer and any subcontractors proposed in its tender must not be insolvent, bankrupt, in liquidation, or under administration or receivership. - The Tenderer and any subcontractors proposed in the tender must not be named as non-compliant with the Workplace Gender Equality Act 2012 (Cth) by the Workplace Gender Equality Agency as at the Closing Time. Note: that the requirement that the supplier “must be able to outline in your response demonstrated experience and understanding of Nuclear and Radioactive industry.” Has been captured in the requirements as a MUST but as it’s not measured against Legislation etc, it’s not referenced in this section.
Timeframe for Delivery:
November 2026 till 30 March 2027
Other Instructions:
NA
Agency: Department of Industry, Science and Resources
ATM ID: ATM_2026_3664
ATM type: Request for Tender
Category (UNSPSC): 81100000 - Professional engineering services
Canberra, Sydney, Melbourne, Adelaide, Perth, Brisbane, Darwin, Hobart
Panel arrangement: No
Multi-stage: No
Multi-agency access: No
Closes: 21 Oct 2026 15:00 (Canberra time)
Published on AusTender, the Australian Government procurement portal. Responses are lodged through tenders.gov.au (free supplier registration).
Context for bidders
We hold 4 notices from Department of Industry, Science and Resources, going back to August 2026 — 4 of them still open. They buy mostly in Chemicals & Materials, electronics-semiconductors and Transport & Logistics. There are 100 open Water & Environment tenders in Australia. This one closes in 21 days.
More from this buyer
Similar Water & Environment tenders
- RFT2026-5 - Infrastructure Master Plan· closes 22 Oct
- RFT CT2027005 Gregadoo Waste Management Centre CQA Engineer for New General Waste Cell & Monocell· closes 23 Oct
- Haasts Bluff - Equip New Bores - Existing Bore Replacement· closes 5 Oct
- Design & Construct Gundagai WTP CCP Instrumentation & Integration Upgrade· closes 29 Oct
- Remove and Replace Roof Structures, Opal Street WTP Filters· closes 30 Oct
Before you bid on this tender
A quick checklist to help you decide whether to bid and prepare a compliant submission for this water & environment opportunity. Always verify the details on the official source.
- Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
- Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
- Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
- Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
- Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
- Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.
More Water & Environment tenders
- Electrical Works — Repairing of 3 HP monoblock pump sets & 1 Nos 7.5 HP Submersible pump set in TE Bldg BundiBSNL — RAJASTHAN · India
- ARTISTIC WALL PAINTING PROMOTING SAFETY, ENVIRONMENT, ENERGY EFFICIENCY,WATER CONSERVATION ON IDCT Basin Outer peripheral CONCRETE Wall ANDOTHER NOTABLE AREAS AT DM PT and CPU Regenration Area, PVUNL STAGE I.Patratu Vidyut Utpadan Nigam Limited · Patratu Super Thermal Power Project · India
- DAS SchoonmaakdienstenLEV Scholengroep West-Nederland (LEV-WN) · Netherlands
- Pd/pori.Abashan/Laxmi.W 1.23 Construction of 1 Nos 7 Storied (36 unit apartment) Laxmipur Pauroshava Cleaners Residential Building including internal electrical works ,lift & external electrical connections,electro-mechanical works,sanitary and water supply,boundary wall, internal road ,drainage,earth work etc.under Upazila : Sadar,Dist.Laxmipur. [Laxmipur-Sadar]Ministry of Local Government, Rural Development and Co-operatives, Local Government Division, Local Government Engineering Department (LGED), Office of the Executive Engineer, LGED, Lakshmipur · Bangladesh
- Supply of Sanitary materials for daily maintenance works at Kurmitola, Irshall Coloney, Banani, Tejgaon R/A and Administrative area, Dhaka.Ministry of Civil Aviation & Tourism, Civil Aviation Authority of Bangladesh, Office of the Executive Engineer, Civil Division-2 · Bangladesh
FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.
Verify & apply on the official portal →