FreeTender
Accepting bidstenderUnited States

Start Converter UNI — Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components

Issued by DEPT OF DEFENSE · DEPT OF THE NAVY · NAVSUP · NAVSUP WEAPON SYSTEMS SUPPORT · NAVSUP WSS PHILADELPHIA · NAVSUP WEAPON SYSTEMS SUPPORT · via SAM.gov — US federal contract opportunities

Published
6 Nov 2026
Closes
7 Dec 2026, 20:30 UTC
Reference
N0038325QH147
Location
United States
Sector
Manufacturing & Supply

At a glance

DEPT OF DEFENSE · DEPT OF THE NAVY · NAVSUP · NAVSUP WEAPON SYSTEMS SUPPORT · NAVSUP WSS PHILADELPHIA · NAVSUP WEAPON SYSTEMS SUPPORT in United States has published a tender in manufacturing & supply: “Start Converter UNI — Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components”. Submissions close on 7 December 2026, 32 days from today. Quote reference N0038325QH147 in any correspondence with the buyer. FreeTender has recorded 727 notices from this buyer since 2026, 275 of them currently open. There are 2,875 open manufacturing & supply notices in United States on FreeTender. Bids are submitted to the buyer through SAM.gov — US federal contract opportunities, not through FreeTender.

Details

DEPT OF DEFENSE · DEPT OF THE NAVY · NAVSUP · NAVSUP WEAPON SYSTEMS SUPPORT · NAVSUP WSS PHILADELPHIA · NAVSUP WEAPON SYSTEMS SUPPORT is soliciting Start Converter UNI — Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components. Solicitation number N0038325QH147. Classified under NAICS 333611 — Turbine and Turbine Generator Set Units Manufacturing. Product/service code 2835 — GAS TURBINES AND JET ENGINES; NON-AIRCRAFT PRIME MOVER, AIRCRAFT NON-PRIME MOVER, AND COMPONENTS. Responses are due by 07 December 2026 20:30 UTC. Posted on SAM.gov, the US federal contract opportunities system; registration is required to bid.

CONTACT INFORMATION|4|N722.29|B4S|215-697-5072|alexis.t.hoepfl.civ@us.navy.mil| COMMERCIAL ITEM PROCUREMENT NOTICE - AWARD|4|X|||| COMMERCIAL PRODUCT PROCUREMENT NOTICE|5| | | | | | ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19| | | | | | | | | | | | | | | | | | | | HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X|||||||| INSPECTION AND ACCEPTANCE OF SUPPLIES|26| | | | | | | | | | | | | | | | | | | | | | | | | | | FMS DELIVERY AND SHIPPING INSTRUCTIONS|3| | |See Solicitation Remarks.| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Reports Combo||TBD|N00383|TBD|TBD|See Schedule|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1| | VALUE ENGINEERING (JUN 2020)|3| | | | EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4| | | | | WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|1 Year|45 days of discovery of defect||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4| | | | | TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2| | | BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11| | | | | | | || | | | LIMITATIONS ON PASS-THROUGH CHARGES (DEV 2026-O0048)(MAR 2026)|1| | SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7| | | | | | | | BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5| | | | | | BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1| | ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13| | | | | | | | | | | | | | ROYALTY INFORMATION (APR 1984)|1| | REQUIREMENTS FOR SUBMISSION OF PROPOSALS VIA ELECTRONIC MEDIA (JAN 2018)|1| | NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| EVALUATION-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEV 2026-O0028)(FEB 2026))|3| | | | The purpose of this amendment is as follows: 1. The Solicitation Notes are updated as follows: This is a Spares requirement for the procurement of the item(s) identified in this solicitation. 2. Any clause updates, deletions, or additions are hereby incorporated in the following pages. 3. The Solicitation Closing Date is hereby extended until 07 December 2026. All other terms and conditions remain the same. End of Amendment. \ This is a competitive Spares requirement for the procurement of the item(s) identified in this solicitation. NSN: 7RH 2835 016648077 / Part Number 51090360-001. Interested parties must be a NAVSUP WSS approved source of supply for this item in order to compete for the requirement. Offers must be received before and/or by the closing due date to be considered. Can only be procured only from suppliers who provide FAA-Certified parts which possess a FAA Authorized Release Certificate, FAA Form 8130-3 Airworthy Approval Tag, from certified repair stations pursuant to 14 CFR Part 14. The evaluation criteria for this requirement will be based on Lowest Price Technically Acceptable (LPTA). Award will be made based on lowest price. NAVSUP WSS requests that vendors submit a firm-fixed price (FFP) quote/proposal. If determined necessary by the Navy, the offeror agrees to provide adequate pricing information upon bidding to assist the Navy in its fair and reasonable price determination. The following is an Addendum to FAR 52.212-4 Contract Terms and ConditionCommercial Items Applicable only for P-8 CAT 1 & CAT 2 items In addition to paragraph (a), "Inspection and Acceptance", add the following: 1. The contractor shall provide notification to the government of all proposed engineering changes that effect components managed under this contract. No changes shall be made without written authorization from the government for any change which will or may affect: a) Interchangeability, performance, weight, safety, reliability, servicelife, fit, form, function, and maintainability; or b) Federal Aviation Administration (FAA) type certification c) Require part re-identification for any reason 2. The change notification shall include at a minimum the affected parts number(s) and a required approval date in order to maintain current contractual performance requirements. The contractor shall make available to the government any commercially available change documentation such as Service Bulletins or Original Equipment Manufacturer Product Line Change Notifications. Additional Remarks for Clause WSSTERMFZ05 - FMS DELIVERY AND SHIPPING INSTRUCTIONS, (5) Forward one (1) copy of DD250 to NAVSUP WSS-PHIL Code N52: PD # PCN04441426403, Code N52214.09 PD # PGYY5440726157, Code N52214.03 Remarks for PD # PCN04441426403 (Canada): Lot 13 Aircraft POC: ashlyn.m.blimegger.civ@us.navy.mil P/N: 51090360-001 Ship-To MAPAC: DCN0PA SUPPAD: DPASAH Address: WING COMMANDER 14 WING GREENWOOD GREENWOOD NOVA SCOTIA CANADA B0P 1N0 Case: CN-P-SAH PDLI: 27Z100 TAC: P598 RSN: 027 Provisions for a Certificate of Conformance must be included on all CN P-8 contracts. Remarks for PD # PGYY5440726157 (Germany): LOT 12 P-8 Aircraft POC: theodore.j.haag.civ@us.navy.mil Code: N52214.03 P/N: 51090360-001 NSN: 2835016648077 Ship To MAPAC: DGY004 Germany P-8 NAVAL SYSTEMS INC. (904) 248-4300, EXT. 4307 8100-4 WESTSIDE INDUSTRIAL DRIVE JACKSONVILLE, FL 32219 MARK FOR: DGYY00 GERMAN ARMED FORCES COMMAND USA-CAN POC: CONTROL MASTER 703-390-3381 DULLES INTERNATIONAL AIRPORT 23745 AUTOPILOT DRIVE DULLES, VA 20166-7629 CASE: GY-P-SCO TAC: P937 SUPPADD: DZ4SCO All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders, and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. Early and incremental deliveries accepted and preferred. \

Context for bidders

We hold 727 notices from DEPT OF DEFENSE · DEPT OF THE NAVY · NAVSUP · NAVSUP WEAPON SYSTEMS SUPPORT · NAVSUP WSS PHILADELPHIA · NAVSUP WEAPON SYSTEMS SUPPORT, going back to August 2026 — 275 of them still open. They buy mostly in Space satellite, Manufacturing & Supply and Electronics semiconductors. There are 2,875 open Manufacturing & Supply tenders in United States. This one closes in 32 days.

Before you bid on this tender

A quick checklist to help you decide whether to bid and prepare a compliant submission for this manufacturing & supply opportunity. Always verify the details on the official source.

  • Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
  • Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
  • Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
  • Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
  • Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
  • Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.

More Manufacturing & Supply tenders

All Manufacturing & Supply tenders →

FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.

Verify & apply on the official portal →