Provision of UPS - MEICA-UPS-01
Issued by BIP SOLUTIONS LIMITED · via UK Contracts Finder
- Published
- 19 Nov 2026
- Closes
- 25 Nov 2026, 14:55 UTC
- Value
- GBP 500,000
- Reference
- C4N123459269
- Location
- United Kingdom
- Sector
- Transport & Logistics
- Type
- goods
At a glance
BIP SOLUTIONS LIMITED in United Kingdom has published a procurement notice in transport & logistics: “Provision of UPS - MEICA-UPS-01”. Submissions close on 25 November 2026, 6 days from today. The stated value is GBP 500,000. Quote reference C4N123459269 in any correspondence with the buyer. 2 documents are attached to this notice. FreeTender has recorded 4 notices from this buyer since 2025, 2 of them currently open. There are 366 open transport & logistics notices in United Kingdom on FreeTender. Bids are submitted to the buyer through UK Contracts Finder, not through FreeTender.
Details
The Subcontractor shall design, manufacture, supply, deliver, test and commission 4 No. complete UPS systems: 1 No. at Stoneleigh, 1 No. at Canley Brook and 2 No. at Burton Green.
1. Technical Requirements
Each UPS shall be rated at 210 kVA, 400 V, with 4 x 60 kW power modules and N+1 hot-swappable architecture. The Subcontractor shall demonstrate that the required connected load remains supported with one power module unavailable. Requirement Stoneleigh Canley Brook Burton Green Battery sizing load 35 kW 17 kW 70 kW Connected design load 31 kW TBC 66 kW Protection breaker 100 A 100 A 250 A Separate static switch N/A N/A 400 A, 400 V
Each UPS shall provide an output fault current of 987 A for 200 ms. Supplier submissions shall demonstrate compatibility with the project protection requirements.
2. Batteries
Provide complete VRLA battery systems, including racks/enclosures, interconnections, isolation and protection, delivering 90 minutes' autonomy at the specified battery sizing load. Batteries shall recharge to 95% within 900 minutes. Submit sizing and recharge calculations.
3. Transformers and Ancillary Equipment
Provide 250 kVA, 1:1, Dzn0 input and output isolation transformers, together with ATS, static switching and external maintenance bypass arrangements required by the approved site-specific drawings. ATS shall be 400 A, four-pole where indicated.
Include all interconnecting cables, battery cables, protective devices and terminations identified as the UPS supplier's responsibility. Coordinate interfaces with incoming supplies and UPS switchboards.
4. Monitoring
Provide BMS interfaces for battery DC voltage, charge percentage, battery alarms/faults and charger status/alarms. Include communications protocols, interface hardware and point schedules for the UPS, ATS and UPS switchboard, with interface testing.
5. Delivery and Coordination
Scheduled UPS cabinet dimensions are 1,200 W x 1,996 H x 1,100 D mm. Confirm complete equipment footprints, weights, clearances and delivery requirements before manufacture.
6. Testing and Handover
Include FAT, commissioning, SAT and resistive load bank testing, with all temporary equipment, connections and removal. Demonstrate capacity, autonomy, recharge, redundancy, transfer/bypass operation, alarms and communications. Provide evidence of fault-current performance.
Submit equipment drawings, schematics, protection data, test procedures/results, commissioning records, as-built information and O&M manuals.
Suppliers shall identify proposed equipment and deviations. Confirm the missing Canley Brook design load, whether Burton Green loads apply per UPS, and site-specific equipment quantities and supply boundaries before manufacture.
Additional information: Please review attached schematic and narrative specification.
Open opportunity - This means that the contract is currently active, and the buying department is looking for potential suppliers to fulfil the contract. Contract summary Industry - Electrical installations for railways - 34632300 - Special-purpose electrical goods - 42992000 Location of contract West Midlands Value of contract £250,000 to £500,000 Procurement reference C4N123459269 Published date 19 November 2026 Closing date 25 November 2026 Closing time 2:55pm Contract start date 15 March 2027 Contract end date 14 February 2028 Contract type Supply contract Procedure type
Other: Open
Contract is suitable for SMEs? No Contract is suitable for VCSEs? No Description The Subcontractor shall design, manufacture, supply, deliver, test and commission 4 No. complete UPS systems: 1 No. at Stoneleigh, 1 No. at Canley Brook and 2 No. at Burton Green.
1. Technical Requirements
Each UPS shall be rated at 210 kVA, 400 V, with 4 x 60 kW power modules and N+1 hot-swappable architecture. The Subcontractor shall demonstrate that the required connected load remains supported with one power module unavailable. Requirement Stoneleigh Canley Brook Burton Green Battery sizing load 35 kW 17 kW 70 kW Connected design load 31 kW TBC 66 kW Protection breaker 100 A 100 A 250 A Separate static switch N/A N/A 400 A, 400 V Each UPS shall provide an output fault current of 987 A for 200 ms. Supplier submissions shall demonstrate compatibility with the project protection requirements.
2. Batteries
Provide complete VRLA battery systems, including racks/enclosures, interconnections, isolation and protection, delivering 90 minutes' autonomy at the specified battery sizing load. Batteries shall recharge to 95% within 900 minutes. Submit sizing and recharge calculations.
3. Transformers and Ancillary Equipment
Provide 250 kVA, 1:1, Dzn0 input and output isolation transformers, together with ATS, static switching and external maintenance bypass arrangements required by the approved site-specific drawings. ATS shall be 400 A, four-pole where indicated. Include all interconnecting cables, battery cables, protective devices and terminations identified as the UPS supplier's responsibility. Coordinate interfaces with incoming supplies and UPS switchboards.
4. Monitoring
Provide BMS interfaces for battery DC voltage, charge percentage, battery alarms/faults and charger status/alarms. Include communications protocols, interface hardware and point schedules for the UPS, ATS and UPS switchboard, with interface testing.
5. Delivery and Coordination
Scheduled UPS cabinet dimensions are 1,200 W x 1,996 H x 1,100 D mm. Confirm complete equipment footprints, weights, clearances and delivery requirements before manufacture.
6. Testing and Handover
Include FAT, commissioning, SAT and resistive load bank testing, with all temporary equipment, connections and removal. Demonstrate capacity, autonomy, recharge, redundancy, transfer/bypass operation, alarms and communications. Provide evidence of fault-current performance. Submit equipment drawings, schematics, protection data, test procedures/results, commissioning records, as-built information an
Context for bidders
We hold 4 notices from BIP SOLUTIONS LIMITED, going back to March 2025 — 2 of them still open. They buy mostly in Transport & Logistics, Manufacturing & Supply and Financial & Professional Services. There are 366 open Transport & Logistics tenders in United Kingdom. This one closes in 6 days.
More from this buyer
Similar Transport & Logistics tenders
Explore United Kingdom
Documents
- documentDownload (text/html)
- documentDownload
Before you bid on this tender
A quick checklist to help you decide whether to bid and prepare a compliant submission for this transport & logistics opportunity. Always verify the details on the official source.
- Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
- Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
- Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
- Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
- Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
- Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.
Who won similar contracts
Recent contract awards in United Kingdom, from published award notices.
- Consulting Services for the Preparation of a Regional Spatial Strategy and 3 Master Plans for Tashkent RegionWon by ARUP International Projects LTD (United Kingdom) · USD 2,236,567.27 · 1 Oct 2026
- Personal Data Protection, Legal and Regulatory Frameworks Development, Draft Organizations Structure and Job Descriptions PreparationWon by Cenerva LTD (United Kingdom) · USD 649,000.00 · 28 Aug 2026
More Transport & Logistics tenders
- Fornecimento de Componentes para Contentores Semienterrados e Enterrados no Município de Vila Nova de GaiaÁguas de Gaia, EM, SA · Portugal
- Prestação de serviços de transporte de materiais no âmbito da missão Enhanced Air Policing 2027 (eAP27) LituâniaEstado Maior da Força Aérea · Portugal
- Государственные закупки согласно конкурсной документации/ — Услуги по эксплуатации автомагистралей/автомобильных дорог/улиц/мощеных дорогГУ "Отдел жилищно-коммунального хозяйства, пассажирского транспорта и автомобильных дорог Казыгуртского района" · Kazakhstan
- Государственные закупки согласно конкурсной документации — Услуги по модернизации, реконструкции и переделке платформ и др. (наименований: 2)государственное коммунальное казенное предприятие "Мактааральский аграрный колледж" управления образования Туркестанской области · Kazakhstan
- Услуги по аренде легкового автомобиля с водителем на 2026 год (938)Республиканское государственное предприятие на праве хозяйственного ведения «Национальный ядерный центр Республики Казахстан» Агентства Республики Казахстан по атомной энергии · Kazakhstan
FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.
Verify & apply on the official portal →