Notice Inviting Tender for Rosa Expansion

ROSA POWER SUPPLY COMPANY LIMITED

Registered Office: 7th Floor, B Wing, Raheja Point - I, Jawaharlal Nehru Nagar,

Vakola Market, Santacruz (East), Mumbai – 400055, INDIA

Notice Inviting Tender (International Competitive Bidding)

Ref: RPL-RTPPE-MES-E24-P-00001 Date: 06.07.2016

Rosa Power Supply Company Ltd. , a wholly owned subsidiary of Reliance Power L imited invites International Competitive Bidding (ICB) for setting up of 2X600 MW coal fired Super / Ultra Super Critical Thermal Power Project at Rosa, Shahjahanpur, Uttar Pradesh, India.

1. SCOPE OF WORK

The entire scope of works of the complete power plant (including Civil Works for complete Plant) is divided in two parts viz. Part -A and Part -B and the division of Scope of Works under the respective parts are as enumerated below:

Part – A : Main Plant – BTG

a. Complete Boiler Island with all associated auxiliaries b. Complete Turbine and Generator System with all associated auxiliaries

Part – B : Balance of Plant and all Civil Works (incl. for Main Plant) – BOP

a. Complete Civil Works of Main Plant (BTG and BOP), inside and outside plant, including area grading, boundary wall, non plant buildings etc. b. Complete Balance of Plant System incl uding Station C&I and facilities inside and outside the Plant designated boundary c. Equipments and Works, complete in all respects, for transportation of coal d. Electrical Works complete for BTG + BOP including Switchyard for power evacuation Bidders participating in this tender can quote either for the complete BTG scope of works under Part A or complete BOP scope of works under Part B or for both together depending upon their qualifications as stipulated under Clause 2.0.

2. QUALIFICATION REQUIREMENTS

2.1 Qualification Routes There are three (3) different routes proposed for the above Scope of Work for complete Power Plant. The prospective bidder may seek the qualifications through any of following

routes as per their experience:

2.1.1 Route: 1 [EPC. (for complete Plant)]

Bidders or a Joint Venture or Consort ium meeting the requirement at 2 .2.1 below, shall associate/collaborate with Supplier(s) or a Holding Compa ny meeting the requirements at 2.2.2 below and can bid for the entire scope of work (including Civil Works) for the power plant viz Part-A and Part-B

2.1.2 Route: 2 [BTG Manufacturer]

Bidder meeting the requirement at 2 .2.2 below on his own or Bidders (including Joint Ventures) meeting the requirement at 2.2.2.1 or 2.2.2.2 who shall associate/collaborate with Supplier meeting the requirements at 2.2.2.2 or 2.2.2.1 respectively (as applicable), or a Holding Company sourcing from their Subsidiaries who meet the requirements at 2.2.2 below, ca n bid for the complete scope of works (excluding Civil works) for Part -A for the power plant.

2.1.3 Route: 3 [EPC for BOP incl. entire Civil Works for complete Plant]

Bidders meeting the requirement at 2.2.3 below, can bid for the complete scope of works (including Civil works) for Part-B for the power plant.

2.2 Qualifying Criteria for Bidders 2.2.1 EPC for Complete Plant A regular Engineering, Procurement and Construction (EPC) Company who has engineered, supplied, erected and commissioned at least one coal based thermal power project, including all Balance of Plants, having at least two (2) units of 300 MW or higher rating would be eligible to bid. The subject Power Plant should have been in successful operation for a period of not less than one (1) year as on date of bid opening. The scope of work of such a reference plant should have necessarily included design, engineer ing, supply, erection, testing and commissioning of the total plant (with or without Civil works) including all associated Structural, Mechanical, Electrical and C&I works on EPC basis. and Minimum Average annual turnover of INR 24bn (USD 360mn) in the pas t 3 financial years and Net Worth of the Bidder as on the last day of the preceding financial year should not be less than 25% of the paid-up share capital. 2.2.2 BTG Manufacturer

2.2.2.1 Steam Generator Manufacturer:

The Bidder should be a regular manufacturer of Steam Generator (SG) for 500 MW or more unit capacity. The Bidder should have designed, engineered, manufactured/got manufactured, erected/supervised erection, commissioned/supervised commissioning of at least one (1) number of pulverized coal fired super -critical/ultra super -critical Steam Generator having rated capacity of 1500 tonnes of steam per hour or above as on the date of bid submission. Steam generator should be of the type specified, i.e. single pass (tower type) or two pass type using either spiral w ound (inclined) or vertical plain/rifled type water wall tubing. In addition, the steam generator should have been provided with evaporator suitable for variable pressure operation (sub - critical and super-critical pressure ranges). The subject Steam Generator should have been in successful operation for a period of not less than one (1) year as on date of bid opening. 2.2.2.2 Turbine Generator Manufacturer The Bidder should be a regular manufacturer of Turbine Generator (TG) for 500 MW or more unit capacity. The Bidder should have designed, engineered, manufactured / got manufactured, erected / supervised erection, commissioned / supervised commissioning of at least one (1) number steam turbine of tandem compound, condensing, reheat type of 500 MW or above cap acity with main steam pressure of 225 Kg/cm2 or higher and main steam / reheat temperature of 565 0 C / 565 0 C or higher and at least one (1) number of Generator of two pole hydrogen / water cooled stator and hydrogen / water cooled rotor of 500MW or above capacity. The subject Turbine and Generator should have been in successful operation for a period of not less than one (1) year as on date of bid opening. 2.2.2.3 Financial Criteria for 2.2.2.1 and 2.2.2.2 The financial criteria applicabl