Notice for Electrical and Air Conditioning Works at Phusro Bazar Branch Under RBO Bokaro
Issued by State Bank of India · via State Bank of India — procurement notices
- Published
- 18 Sept 2026
- Closes
- 24 Sept 2026
- Location
- LHO, PATNA, India
- Sector
- Financial & Professional Services
Details
AO-DHN/RBO-2/2026-27/003: TENDER NOTICE FOR ELECTRICAL AND AIR CONDITIONING WORKS AT PHUSRO BAZAR BRANCH UNDER RBO BOKARO
SR. ITEM DESCRIPTIONS UNIT QTY. RATE AMOUNT 1 Supplying, laying,lugging,glanding, testing & commissioning of PVC insulated aluminium armoured 1.1 KV grade 3.5 core cable of following size with making proper trench/support as per IS specification and complete with all respect as per the instruction of Engineer-In-Charge A 3.5 core 240 sqmm cable MTR. 50 B 3.5 core 35 sqmm cable (from Panel to AC,LD,RP,UPS TPN DB) MTR. 200 MAIN INCOMING SOURCE PANEL (MISP) : Supply, installation, testing and commissioning of main incoming (MIP) Panel suitable for wall /floor mounted indoor type, air insulated, totally enclosed vermin-proof (IP 42), dead front, cubicle type, 2 mm thick sheet steel enclosure use on 415 V, 3 Ph., 4 wire, 50 Hz. A.C. system, instrumental panel, CTs, incoming and outgoing cable compartmen. The Panel shall be complete with switches as per site requirement, interconnection, G.I. earth busbar of adequate size covering the total length of switch board with drilled holes, G.I. bolts, nuts, washers etc. as directed by E-I-C. The cubicle should be painted with two coats of light grey synthetic enamel paint over two coats of zinc chromate primer. The complete fabrication, construction shall be done as per the site condition and conforming to the relevant IS. Name plate of Panels Danger Board, incoming and outgoing feeders with Ampere rating of switches are to be fixed up on front door above or below the respective switches. Approval of Manufacturer’s drawings from E-I-C. The work shall include dismantling work as required of old panel.The Panel consists of the following INCOMING : 1 No. 415V, 400A 4P MCCB (35 KA); 1 No. 415V, 320A 4P On-Load Changeover Switch; 1 No. : Digital Multi Function Meter (MFM) for Current, Voltage, Frequency, Power; 3 Nos.: LED Phase indicating lamps; 3 Nos.: Suitable CTS, 2 sets of PVC sleeved TPN Tinned Copper Busbar 400 Amp. for phases and neutral; G.I. EARTH BUSBAR 25mm x 3mm covering the total length of panel. OUTGOING : Termination I: (To be connected with Change Over) (i) 4 No. 100 A (25KA) 4P MCCB for Light,Raw Power,UPS (ii) 3 Nos. 63A (10 KA) TPN MCB (iii) 6 Nos. 32-63A (10 KA) DP MCB for , BM AC, System AC etc Termination-II: (Not to be connected with Change Over) (i) 2 Nos. 100A (25KA) 4P MCCB for ACDB 3 (A) UPS INCOMING DB: Supply of all required materials and fixing of input UPS box (Company made) having provision of the following arrangement complete. Incoming: 1 No. 100A (25KA) TPN MCB Outgoing: 3 Nos. 63 A (10KA) DP MCB NO. 1 (B) UPS OUTGOING DB: Supply of all required materials and fixing of output UPS box (Company made) having provision of the following arrangement complete. Incoming: 1 no. 63 A DP MCB Outgoing: 4 No. 40A (10KA) DP MCB NO. 1 4 ACDB / RAW POWER DB/ LIGHT DB / COMPUTER DB Supply and installation of following metallic double door MCB Distribution Board with MCB having breaking capacity of 10 KA (minimum) complete with busbar, interconnection, painting, mounted on flat iron frame on wall/flushed with finished wall by chase cutting, mending good to original finish painting etc. as required. Name plate & number of DBs are to be fixed up on front door of DBs for their identification. A ACDB,LDB & RPDB: Consumer unit TPN MCB DB complete with busbar and the following MCBs. INCOMING : 1 No. 415V 100A (10KA) TPN MCB OUTGOING : 12 Nos. 240V 32A (10 KA) SP MCB NO. 5 B CDB : Consumer unit SPN MCB DB complete with busbar and the following MCBs. INCOMING : 1 No. 415V 32A (10KA) DP MCB OUTGOING : 8 Nos. 240V 10A (10 KA) SP MCB NO. 3 2 STATE BANK OF INDIA SCHEDULE OF WORKS : ELECTRICAL WORKS PROJECT : PHUSRO BAZAR BRANCH UNDER RBO BOKARO, A.O. DHANBAD NO. 1 C LDB : Consumer unit SPN MCB DB complete with busbar and the following MCBs. INCOMING : 1 No. 415V 32A (10KA) DP MCB OUTGOING : 8 Nos. 240V 16A (10 KA) SP MCB NO. 6 5 Machine/Computer Raw Power/UPS/AC/ power point wiring as mentioned in rows below in MS conduit of IS specification of proper size with all material supply installation and commissioning complete from DB .The wiring shall be carried out on surface above false ceiling by chiseling the existing surface and plastering the same with cement etc., or as cutting of tiles(with finishing) after fixing the MS conduit with all accessories like saddles screws, bends T-joint etc. 2 coats of painting Matching to the surface including supply installing, testing, commissioning of modular plate type switch and socket for computer terminal on sheet steel enclosure (cadmium plated),duly fitted with screw to the steel conduit and fixed to the wall partition furniture with all interconnection and proper earthing .All the opening shall be covered with blank plate and be sealed to make the box vermin proof. A With 2 nos. 6 Sq.mm + 1 no. 2.5 Sq.mm. PVC insulated copper wire. MTR. 200 B With 2 nos. 10 Sq.mm + 1 no. 4 Sq.mm. PVC insulated copper wire. MTR. 30 C With 4 nos. 10 Sq.mm + 1 no. 4 Sq.mm. PVC insulated copper wire. MTR. 40 D With 2 Nos. 4 Sq.mm. + 1 No. 2.5 Sq.mm. PVC insulated copper wire. MTR. 350 6 (A) COMPUTER SOCKET OUTLET WITH WIRING Computer socket outlet cluster point including supply and fixing of modular type socket outlet clusters components and its wiring from CDB, complete in all respect as detailed below. Each computer socket outlet cluster comprising the following 5 Nos. 6/10A 5 pin modular type International sockets 1 No. 16A modular type common controlling switch with indicator on table top with 2 Nos. 2.5 Sq.mm. + 1 x 1.5 Sq.mm. (green colour for earth) PVC insulated copper wire in pre - laid (as per ISI) M.S. conduit including interconnection, painting etc. as required to be completed in all respect from CDB to Computer point. NO. 10 (B) COMPUTER SOCKET OUTLET AND ITS WIRING Computer socket outlet cluster point including supply and fixing of modular type socket outlet clusters components complete in all respect as detailed below. Each computer socket outlet cluster comprising the following 3 Nos. 6/10A 5 pin modular type I
Region/Province: LHO, PATNA
Published: 18-Sep-2026
Closing date: 24-Sep-2026
Issued by State Bank of India.
Context for bidders
We hold 545 notices from State Bank of India, going back to May 2026 — 197 of them still open. They buy mostly in Real Estate & Facilities, Financial & Professional Services and Construction & Infrastructure. There are 200 open Financial & Professional Services tenders in India. This one closes in 4 days.
More from this buyer
- 013: Tender for Shifting of Branch Premises at Bus Stand Road Pavagada Branch, Pavagada· closes 12 Oct
- Notice Premises Required on Rent/Lease at Rewari· closes 5 Oct
- Notice for Requirement of Commercial Office Premises for Opening New Branch Khori Panan Branch (Dist. Deoghar)· closes 3 Oct
- PRE20260917: Tender Notice for Premises Required on Lease for Siruthozhil Nagercoil Branch (70011)· closes 5 Oct
- Notice Inviting Tender for Purchase of Free Hold Land at Muzaffarpur Within the Jurisdiction of Municipal Corporation for Construction of Administrative Office· closes 20 Oct
Similar Financial & Professional Services tenders
- Appointment of Merchant Banker/Book Running Lead Manager for proposed Initial Public Offering of AEGCL· closes 2 Nov
- Selection of Chartered Accountant/ Cost Accountant Firms For Internal Audit of Dhanbad Municipal Corporation, Dhanbad· closes 9 Oct
- Job of Fire Audit of DPL· closes 28 Sept
- Consultancy Services for Preparation of DPR for the Construction of ROB between Chandni Chowk Hatia to Police Headquarter keeping in view of Smart City in lieu of LC No HB 1 between Hatia Balsiring Station· closes 8 Oct
- Outsourcing of Paramedical Services at Ttps Hopital, Ntpc Talcherthermal on ST Basis for 03 Months· closes 22 Sept
Documents
- PRICE+BID20260919123411907.pdfDownload (pdf)
Before you bid on this tender
A quick checklist to help you decide whether to bid and prepare a compliant submission for this financial & professional services opportunity. Always verify the details on the official source.
- Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
- Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
- Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
- Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
- Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
- Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.
More Financial & Professional Services tenders
- Individual Technical Consultant to develop a Full Stack Software for the Consolidated Cash Transfer Programme (CCTP)Social Protection, Pensions & Senior Citizens Affairs · Kenya
- Individual Consultant for Enhanced Single Registry and Community Development MISsSocial Protection, Pensions & Senior Citizens Affairs · Kenya
- Provision of Consultancy Services for SCADA/ADMS Technical Mentorship Services.TANZANIA ELECTRIC SUPPLY COMPANY LIMITED · Tanzania
- Renewal of Manage Engine License SubscriptionTANZANIA REVENUE AUTHORITY · Tanzania
- Provision of Conference facilities MbeyaNATIONAL BOARD OF ACCOUNTANTS AND AUDITORS · Tanzania
FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.
Verify & apply on the official portal →