FreeTender
Accepting bidsitbNorth Macedonia

North Macedonia – Laboratory, optical and precision equipments (excl. glasses) – Supply of laboratory consumables

Issued by PHI Institute of Public Health of Republic of North Macedonia Skopje · via TED — Tenders Electronic Daily (EU)

Published
4 Nov 2026
Closes
30 Nov 2026, 23:59 UTC
Reference
766713-2026
Location
North Macedonia
Sector
Manufacturing & Supply
Type
goods

At a glance

PHI Institute of Public Health of Republic of North Macedonia Skopje in North Macedonia has published an invitation to bid in manufacturing & supply: “North Macedonia – Laboratory, optical and precision equipments (excl. glasses) – Supply of laboratory consumables”. Submissions close on 30 November 2026, 27 days from today. Quote reference 766713-2026 in any correspondence with the buyer. One document is attached to this notice. FreeTender has recorded 3 notices from this buyer since 2026, 3 of them currently open. There are 5 open manufacturing & supply notices in North Macedonia on FreeTender. Bids are submitted to the buyer through TED — Tenders Electronic Daily (EU), not through FreeTender.

Details

Supply of laboratory consumables

Lots

Lot 1 — 201: PP (polypropylene) syringe membrane filter discs, pore size 0.22 µm, diameter 25–33 mm

Lot 2 — 202: PVDF (polyvinylidene difluoride) syringe membrane filter discs, pore size 0.45 µm, diameter 25–33 mm

Lot 3 — 203: PVDF (polyvinylidene difluoride) syringe membrane filter discs, pore size 0.22 µm, diameter 25–33 mm

Lot 4 — 204: Hydrophilic PTFE (polytetrafluoroethylene) syringe membrane filter discs, pore size 0.22 µm, diameter 25–33 mm

Lot 5 — 205: Hydrophobic PTFE (polytetrafluoroethylene) syringe membrane filter discs, pore size 0.45 µm, diameter 25–33 mm

Lot 6 — 206: PES (polyethersulfone) syringe membrane filter discs, pore size 0.45 µm, diameter 25–33 mm

Lot 7 — 207: PES (polyethersulfone) syringe membrane filter discs, pore size 0.22 µm, diameter 25–33 mm

Lot 8 — 208: Regenerate cellulose (RC) membrane filter, pore size 0.22 µm, diameter 47 mm

Lot 9 — 209: Regenerate cellulose (RC) membrane filter, pore size 0.45 µm, diameter 47 mm

Lot 10 — 210: Hydrophilic PTFE (polytetrafluoroethylene) membrane filter, pore size 0.22 µm, diameter 47 mm

Lot 11 — 211: Hydrophilic PTFE (polytetrafluoroethylene) membrane filter, pore size 0.45 µm, diameter 47 mm

Lot 12 — 212: Hydrophilic PTFE syringe membrane filter discs, pore size 0.2 µm, diameter 10–15 mm, or equivalent

Lot 13 — 213: Sterile pipette tips with aerosol filter, volume 0.5–20 µL, or equivalent, validated for molecular methods

Lot 14 — 214: Sterile pipette tips with aerosol filter, volume 2–100 µL, or equivalent, validated for molecular methods

Lot 15 — 215: Sterile pipette tips with aerosol filter, volume 50–1000 µL, or equivalent

Lot 16 — 216: Sterile pipette tips with aerosol filter, volume 0.1–10 µL, or equivalent, validated for molecular methods

Lot 17 — 217: Nylon membrane filter for mobile phase, diameter 47 mm, pore size 0.20 µm, or equivalent

Lot 18 — 218: Cellulose acetate syringe membrane filter discs, pore size 0.45 µm, diameter 10–15 mm

Lot 19 — 219: Nylon syringe filter, diameter 15 mm, pore size 0.22 µm

Lot 20 — 220: PD-Tips II, 1.25 mL, compatible with Brand HandyStep S DE-M manual repeating pipette, or equivalent

Lot 21 — 221: Quartz cuvettes, optical path length 50 mm, for spectrophotometer compatible with PHARO 300 model, or equivalent

Lot 22 — 222: Quartz cuvettes, optical path length 10 mm, for spectrophotometer compatible with PHARO 300 model, or equivalent

Lot 23 — 223: Mini collection tube with clot activator for analysis of capillary blood samples, volume up to 2 mL

Lot 24 — 224: Sterile lancet for capillary blood collection, penetration depth up to 2 mm

Lot 25 — 225: Strips of 8 clear, high-profile 0.2 mL tubes (19–22 mm in height) for real-time polymerase chain reaction (PCR); free of detectable DNase, RNase, and human DNA; supplied without caps; compatible with the QS-5 system or an equivalent instrument.

Lot 26 — 226: Eco 20 mL cylinder unit suitable for Methonom Eco Titrator

Lot 27 — 227: VRLA AGM battery, LL12007, length 151 mm, width 65 mm, height 94 mm

Lot 28 — 228: Digital liquid dispenser with fixed volume of 10 mL

Lot 29 — 229: Wooden test tube holder

Lot 30 — 230: Disposable PTFE liners for Visiprep Manifold DL 12, 100 per pack

Lot 31 — 231: pH meter electrode with temperature compensation for LLG, or equivalent

Lot 32 — 232: Conductivity meter electrode with built-in temperature compensation, HI-7631233, or compatible with HANNA HI6321 conductivity meter

Lot 33 — 233: pH meter electrode with built-in temperature compensation, HI-11310, or compatible with HANNA HI6221 pH meter

Lot 34 — 234: Electronic adjustable-volume pipette with display, range 5–100 µL, with corresponding tips

Lot 35 — 235: Replacement gaskets for Visiprep Manifold DL 12, 2 per pack

Lot 36 — 236: Stainless steel protective needles (Replacement Liner Guide Needles) for Visipre Manifold DL 12, 12/pack

Lot 37 — 237: Quartz cuvettes for UV/Vis spectrophotometer, x1 (dimensions 10 cm), or equivalent

Lot 38 — 238: Kit for determination of organically and inorganically bound phosphorus in powdered machine-washing detergents, Spectroquant Crack Set 10, or equivalent

Lot 39 — 239: Laboratory borosilicate glass bottle for mobile phase, 2 L, with thermo cap for eluents

Lot 40 — 240: Laboratory antistatic weighing tweezers with adjustable spacing*

Lot 41 — 241: Antistatic laboratory rack with 20 slots for stable positioning of test tubes (diameter 16–20 mm), made of high-quality chemically resistant polypropylene (PP)

Lot 42 — 242: 2 L laboratory eluent bottle made of polypropylene, with standard GL45 thread

Lot 43 — 243: Marinelli beakers (plastic containers for radioactivity measurement), Type-0504G 500 mL and Type1040G 1000 mL

Lot 44 — 244: Hydrophobic PTFE (polytetrafluoroethylene) membrane filter, pore size 0.22 µm, diameter 47 mm

Lot 45 — 245: Hydrophobic PTFE (polytetrafluoroethylene) membrane filter, pore size 0.45 µm, diameter 47 mm

Lot 46 — 246: Double-ended stainless-steel micro spoon/spatula, length 150–220 cm, spoon width 3–6 mm, spoon capacity 1.25 mL

Lot 47 — 247: Microfiber filter discs, 11 cm, 1.5 µm, 100 per pack

Lot 48 — 248: Nylon stretch film, 300 × 45 mm

Lot 49 — 249: PVC Pasteur pipettes, 1 mL

Lot 50 — 250: Transparent plastic bottles, volume 1.5–3 L

Lot 51 — 251: Plastic containers with planar geometry, volume 100–150 mL

Lot 52 — 252: Disposable polystyrene weighing boats

Lot 53 — 253: Portable handheld optical magnifier with ergonomic handle, glass lens with at least 3× to 5× magnification and integrated battery-powered LED illumination

Lot 54 — 254: Sterile filter-free pipette tips, volume 10–100 µL, or equivalent, for Thermo Finnpipette F2

Lot 55 — 255: Pipette tips, V:10 mL, compatible with Capp Solo 1–10 mL pipette

Lot 56 — 256: Pipette tips, V: 1000 µL, L:87 mm, compatible with Thermo Scientific Finnpipette F2 (blue), 10 × 96 per pack

Lot 57 — 257: Pipette tips, V: 200 µL, L: 60 mm, compatible with Thermo Scientific Finnpipette F2 (yellow), 10 × 96 per pack

Lot 58 — 258: Pipette tips, V: 30 µL, L: 60 mm, sterile, filtered, PCR-ready, compatible with Thermo Scientific Finnpipette F2 (yellow), 10 × 96 per pack

Lot 59 — 259: Pipette tips, V: 5 mL, compatible with HumaPette 1–5 mL pipette

Lot 60 — 260: Pipette tips, V: 5 mL, compatible with Thermo Scientific Finnpipette Stepper, 50 per pack

Lot 61 — 261: Pipette tips, V: 5–300 µL, L: 61 mm, compatible with Thermo Scientific Finnpipette F2 (orange, for 8-channel pipette), 10 × 96 per pack

Lot 62 — 262: Control valves for Visiprep™ Manifold DL 12, 2 per pack

Lot 63 — 263: Set of 6 mechanical adjustable-volume pipettes, with appropriate tips for each pipette and a storage stand

Lot 64 — 264: Silicone tubing for supernatant aspiration with peristaltic pump, wall thickness at least 2.4 mm and inner diameter 4.8–6.4 mm

Lot 65 — 265: Platinum-cured silicone tubing for water filtration, wall thickness at least 1.6 mm and inner diameter at least 8 mm

Lot 66 — 266: Glass pH electrode for titration in non-aqueous media, with fixed cable, compatible with Methronom potentiometric titrator, or equivalent

Lot 67 — 267: Transparent glass bottles, volume 1 L

Lot 68 — 268: Antistatic polystyrene weighing dish, volume 5 mL, dimensions L 50–60 mm × W 30–40 mm × H 5–7 mm

Lot 69 — 269: Thermometer for field measurement of ambient air temperature

Lot 70 — 270: Universal double-ended laboratory spatula made of high-quality stainless steel (Inox/AISI 304), total length 150–210 mm, with a flat rounded blade at one end and a narrower tip of maximum width 4 mm at the other

Lot 71 — 271: Paper mouthpieces compatible with SpiroScout spirometer

Lot 72 — 272: ECG paper for Cardiovit AT-1 G2

Lot 73 — 273: Bottle for PSBT wash buffer for washing the filter of a Filtra Max instrument, or equivalent

Lot 74 — 274: Bottle for rinsing lines after completion of elution for a Filtra Max instrument, or equivalent

Lot 75 — 275: Set of two swabs with viral transport medium

Buyer: PHI Institute of Public Health of Republic of North Macedonia Skopje

Buyer country: MKD

Procedure: open

CPV code: 38000000

Full notice, tender documents and how to bid are on the official TED page (link above).

Context for bidders

We hold 3 notices from PHI Institute of Public Health of Republic of North Macedonia Skopje, going back to November 2026 — 3 of them still open. There are 5 open Manufacturing & Supply tenders in North Macedonia. This one closes in 27 days.

Documents

Before you bid on this tender

A quick checklist to help you decide whether to bid and prepare a compliant submission for this manufacturing & supply opportunity. Always verify the details on the official source.

  • Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
  • Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
  • Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
  • Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
  • Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
  • Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.

More Manufacturing & Supply tenders

All Manufacturing & Supply tenders →

FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.

Verify & apply on the official portal →