NASA Marshall Large Item Scrap Processing and Removal Term Contract
Issued by GENERAL SERVICES ADMINISTRATION · FEDERAL ACQUISITION SERVICE · GSA/FAS/GSS/QSCA, MULTIPLE AWARD SCHEDULE CONTRACTING DIVISION · via SAM.gov — US federal contract opportunities
- Published
- 26 Aug 2026
- Closes
- 21 Sept 2026, 22:00 UTC
- Reference
- 2-1-QSC-T-26-112
- Location
- AL, United States
- Sector
- Manufacturing & Supply
Details
GENERAL SERVICES ADMINISTRATION · FEDERAL ACQUISITION SERVICE · GSA/FAS/GSS/QSCA, MULTIPLE AWARD SCHEDULE CONTRACTING DIVISION is soliciting NASA Marshall Large Item Scrap Processing and Removal Term Contract. Solicitation number 2-1-QSC-T-26-112. Classified under NAICS 423930 — Recyclable Material Merchant Wholesalers. Product/service code 9670 — IRON AND STEEL SCRAP. Place of performance: AL, USA. Responses are due by 21 September 2026 22:00 UTC. Posted on SAM.gov, the US federal contract opportunities system; registration is required to bid.
NASA Marshall Space Flight Center - Large Item Scrap Processing and Removal Term Contract IFB No. 2-1-QSC-T-26-112 AMENDMENT (1) NOTIFICATION – AUGUST 26, 2026 Amendment (1) has been issued for IFB No. 2-1-QSC-T-26-112. Prospective bidders are advised that the solicitation package has been revised to address stormwater and environmental permitting requirements, post-bid/pre-award documentation, Performance Guarantee timing, NASA Marshall Space Flight Center environmental coordination, and site access and inspection procedures. Among the revisions, the Apparent Successful Bidder will be required to obtain separate coverage under Alabama Department of Environmental Management (ADEM) General Permit ALG180000 – Salvage/Recycling as a condition of final contract award. Required bidder-controlled post-bid/pre-award actions, including applicable documentation, environmental coordination, permit submission activities, and the Performance Guarantee, are generally required within fifteen (15) business days after written notification that the bidder is the Apparent Successful Bidder, as provided in the amended IFB. Prospective bidders must review Amendment (1), the amended IFB, and all revised solicitation documents in their entirety before submitting a bid. Bidders are responsible for acknowledging Amendment (1) in accordance with the IFB. The U.S. General Services Administration (GSA) is soliciting sealed bids for a Large Item Scrap Processing and Removal Term Contract for Government-owned DEMIL A scrap located at NASA Marshall Space Flight Center (MSFC), Huntsville, Alabama. This is a project-driven term contract. Individual scrap processing and removal projects will be assigned to the awarded Contractor through Project Authorizations issued during the contract term. Projects may vary substantially in size, complexity, schedule, location, equipment requirements, and method of execution. Property may include large industrial equipment, aerospace hardware, test articles, pressure vessels, tanks, structural steel assemblies, manufacturing equipment, fabrication scrap, launch vehicle or propulsion-related hardware, obsolete machinery, oversized ferrous and non-ferrous scrap, and other Government-owned scrap designated for disposition. Projects may require dismantling, torch cutting, mechanical size reduction, rigging, crane operations, heavy lifting, loading, transportation preparation, removal, and incidental site cleanup and restoration. Bidders shall submit a single fixed unit purchase price in dollars per pound ($/lb) representing the amount the Contractor will pay the Government for each verified pound of Government-owned property removed under the Contract.
IMPORTANT DATES - CENTRAL TIME (CT)
•
IFB Issuance: August 20, 2026
•
Amendment (1) Issued: August 26, 2026
•
Deadline for Questions: September 18, 2026
•
Bid Submission Deadline: September 21, 2026 - 5:00 PM CT
•
Public Bid Opening: September 23, 2026 - 9:00 AM CT
•
Anticipated Pre-Award Date: September 25, 2026
MANDATORY PRE-BID SITE INSPECTION A pre-bid site inspection is mandatory. NASA Marshall Space Flight Center is located within Redstone Arsenal. Prospective bidders must review the IFB and revised Site Access and Inspection Procedures for scheduling and all applicable NASA and Redstone Arsenal access, security, identification, visitor-processing, safety, and inspection requirements. Prospective bidders are encouraged to begin the inspection scheduling and access-approval process as early as possible. Certain access requests, including those involving Lawful Permanent Residents, foreign nationals, or other non-routine access, may require additional processing time and security approval. Failure to obtain required access and complete the mandatory pre-bid site inspection may result in a bid being determined non-responsive. STORMWATER AND ENVIRONMENTAL PERMIT REQUIREMENTS NASA Marshall Space Flight Center operates under National Pollutant Discharge Elimination System (NPDES) Permit No. AL0000221. The Contractor will not obtain or modify MSFC's facility permit. As a condition of final contract award, the Apparent Successful Bidder must obtain separate coverage under ADEM General Permit ALG180000 – Salvage/Recycling. Within fifteen (15) business days after written notification that it is the Apparent Successful Bidder, the bidder must complete required bidder-controlled pre-award actions, including coordination with NASA MSFC Environmental, preparation and submission of the applicable Notice of Intent and supporting documentation to ADEM, and provision of evidence of submission to GSA and NASA. The fifteen-business-day requirement applies to actions within the bidder's control. ADEM processing time following a timely and complete submission does not, by itself, make the bidder delinquent. Active ALG180000 coverage is required before final contract award. Refer to the amended IFB and Marshall SWPP Permit Procedures for complete requirements. PERFORMANCE GUARANTEE The Apparent Successful Bidder will be required to furnish a $60,000 Performance Guarantee within fifteen (15) business days after written notification that it is the Apparent Successful Bidder. The Performance Guarantee must be received and approved by the Government before final contract award. Refer to Section 5.2 of the IFB for complete requirements. BID SUBMISSION Sealed bid packages shall be submitted electronically to: [contact details removed]
Bid Submission Deadline: September 21, 2026 - 5:00 PM CT
Bidders must review the amended IFB for complete bid-package requirements, including amendment acknowledgment. COMPLETE SOLICITATION The complete amended IFB and associated solicitation documents, appendices, attachments, procedures, and applicable requirements are available through the GSA Auctions listing: GSA Auctions - NASA Marshall Large Item Scrap Processing and Removal Term Contract:
https: //gsaauctions.gov/auctions/preview/374595
Prospective bidders are responsible for reviewing the complete amended IFB, Amendment (1), and all associated solicitation documents before submitting a bid. The information contained in this SAM.gov notice is a summary only and is not a substitute for the IFB. Submission of a bid constitutes the bidder's agreement to comply with the IFB, all acknowledged amendments, applicable GSAAuctions.gov Terms and Conditions, Standard Form 114C, and all other applicable solicitation requirements.
Context for bidders
There are 3,358 open Manufacturing & Supply tenders in United States. This one closes in 14 days.
Similar Manufacturing & Supply tenders
- Tube, Metallic — 62 each, NSN· closes 22 Sept
- Plate, Mounting — 186 each, NSN· closes 22 Sept
- Hose Assembly, Nonmetal — 129 each, NSN· closes 22 Sept
- FY27 1st Quarter FCI Bastrop Bread Menu· closes 11 Sept
- Spider Weldment ASS — 12 each, NSN· closes 22 Sept
Before you bid on this tender
A quick checklist to help you decide whether to bid and prepare a compliant submission for this manufacturing & supply opportunity. Always verify the details on the official source.
- Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
- Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
- Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
- Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
- Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
- Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.
More Manufacturing & Supply tenders
- Invitation to Tender for Provision of Fitting Out Works, Loose Furnitures and Ancillary Works at Level 7 in National Library BuildingNational Library Board · Singapore
- MSS -Maintenance of Indoor Living Plants Vertical Green Wall (Base Period : 5 Jan 2027 to 4 Jan 2029 & Optional Period : 5 Jan 2029 to 4 Jan 2031)Ministry of Education · Singapore
- 36 CRS and 736 SFS Polaris MRZR Repair PartsDEPT OF DEFENSE · DEPT OF THE AIR FORCE · PACIFIC AIR FORCES · FA5240 36 CONS LGC · United States
- Shielding Gasket, EL — MSC Elect & Electronic ComponentsDEPT OF DEFENSE · DEPT OF THE NAVY · NAVSUP · NAVSUP WEAPON SYSTEMS SUPPORT · NAVSUP WSS PHILADELPHIA · NAVSUP WEAPON SYSTEMS SUPPORT · United States
- Gear Cluster — 2 each, NSNDEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA MARITIME · DLA MARITIME COLUMBUS · DLA LAND AND MARITIME · United States
FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.
Verify & apply on the official portal →