FreeTender
Accepting bidstenderUnited States

Fiber Optic Adapter - and Other Replacement Parts

Issued by DEPT OF DEFENSE · DEPT OF THE NAVY · NAVSUP · NAVSUP WEAPON SYSTEMS SUPPORT · NAVSUP WSS PHILADELPHIA · NAVSUP WEAPON SYSTEMS SUPPORT · via SAM.gov — US federal contract opportunities

Published
16 Oct 2026
Closes
16 Nov 2026, 20:30 UTC
Reference
N0038326QPD07
Location
United States
Sector
Manufacturing & Supply

At a glance

DEPT OF DEFENSE · DEPT OF THE NAVY · NAVSUP · NAVSUP WEAPON SYSTEMS SUPPORT · NAVSUP WSS PHILADELPHIA · NAVSUP WEAPON SYSTEMS SUPPORT in United States has published a tender in manufacturing & supply: “Fiber Optic Adapter - and Other Replacement Parts”. Submissions close on 16 November 2026, 31 days from today. Quote reference N0038326QPD07 in any correspondence with the buyer. FreeTender has recorded 537 notices from this buyer since 2026, 257 of them currently open. There are 2,774 open manufacturing & supply notices in United States on FreeTender. Bids are submitted to the buyer through SAM.gov — US federal contract opportunities, not through FreeTender.

Details

DEPT OF DEFENSE · DEPT OF THE NAVY · NAVSUP · NAVSUP WEAPON SYSTEMS SUPPORT · NAVSUP WSS PHILADELPHIA · NAVSUP WEAPON SYSTEMS SUPPORT is soliciting Fiber Optic Adapter - and Other Replacement Parts. Solicitation number N0038326QPD07. Classified under NAICS 332710 — Machine Shops. Product/service code 4920 — AIRCRAFT MAINTENANCE AND REPAIR SHOP SPECIALIZED EQUIPMENT. Responses are due by 16 November 2026 20:30 UTC. Posted on SAM.gov, the US federal contract opportunities system; registration is required to bid.

CONTACT INFORMATION|4|N762.43|P2R|771-229-0536|[contact details removed]| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X|||||||| INSPECTION AND ACCEPTANCE OF SUPPLIES|26|X||||||||||||X|||||||||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT COMBO TYPE||TBD|N00383|TBD|TBD|See Schedule|TBD|||TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 months|60 days after discovery of defect||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| ALL CONTRACTUAL DOCUMENTS (I.E. CONTRACTS, PURCHASE ORDERS, TASK ORDERSDELIVERY ORDERS AND MODIFICATIONS) RELATED TO THE INSTANT PROCUREMENT ARE CONSIDERED TO BE "ISSUED" BY THE GOVERNMENT WHEN COPIES ARE EITHER DEPOSITED IN THE MAIL, TRANSMITTED BY FACSIMILE, OR SENT BY OTHER ELECTRONIC COMMERCE METHODS, SUCH AS EMAIL. THE GOVERNMENT'S ACCEPTANCE OF THE CONTRACTOR'S PROPOSAL CONSTITUTES BILATERAL AGREEMENT TO "ISSUE" CONTRACTUAL DOCUMENTS AS DETAILED HEREIN. Early and incremental deliveries accepted and preferred. 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 1.2 The material covered in this contract/purchase order will be used in a crucial shipboard system enabling the launch and/or recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital shipboard systems or loss of aircraft. Therefore,the material has been designated as Critical material and special control procedures are invoked to ensure receipt of correct material. 2. APPLICABLE DOCUMENTS DRAWING DATA=629019 |80020| B| |D| | | | DRAWING DATA=629020 |80020| -| |D| | | | DRAWING DATA=629021 |80020| B| |D| | | | DRAWING DATA=629022 |80020| -| |D| | | | DRAWING DATA=629296 |80020| -| |D| | | | 3. REQUIREMENTS - NOT APPLICABLE 4. QUALITY ASSURANCE QUALITY ASSURANCE REQUIREMENTS: 1. For purposes of this TDR, the term NDT shall refer to the following methods: MT - Magnetic Particle Testing, PT - Penetrant Inspection, UT - Ultrasonic Testing, RT - Radiographic Testing, and VT - Visual Testing. 2. Companies performing NDT shall be NADCAP accredited, or a laboratory accredited by one of the organizations listed belowas satisfying ISO 17025 (General requirements for the competence of testing and calibration laboratories). NDT certificates shall be bear the symbols of accreditation and the accreditation body: a. American Association for Laboratory Accreditation (A2LA) b. ANSI National Accreditation Board (ANAB) c. International Accreditation Service, Inc (IAS) d. National Voluntary Laboratory Accreditation Program (NVLAP) e. Perry Johnson Laboratory Accreditation, Inc (PJLA) f. Canadian Association for Laboratory Accreditation Inc. (CALA) g. Standards Council of Canada (SCC) 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE THIS IS AN ALRE NON-CRITICAL ITEM. FOR DRAWING UPDATES, SEE ATTACHED NAWC LKE DRAWING UPDATE SHEET. NAVSUP WSS REFERENCE ONLY: PROCUREMENT TDR 24-10107 WAS UTILIZED IN SUPPORT OF THIS SOLICIATION/CONTRACT. \

Context for bidders

We hold 537 notices from DEPT OF DEFENSE · DEPT OF THE NAVY · NAVSUP · NAVSUP WEAPON SYSTEMS SUPPORT · NAVSUP WSS PHILADELPHIA · NAVSUP WEAPON SYSTEMS SUPPORT, going back to August 2026 — 257 of them still open. They buy mostly in space-satellite, Manufacturing & Supply and electronics-semiconductors. There are 2,774 open Manufacturing & Supply tenders in United States. This one closes in 31 days.

Before you bid on this tender

A quick checklist to help you decide whether to bid and prepare a compliant submission for this manufacturing & supply opportunity. Always verify the details on the official source.

  • Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
  • Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
  • Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
  • Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
  • Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
  • Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.

More Manufacturing & Supply tenders

All Manufacturing & Supply tenders →

FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.

Verify & apply on the official portal →