Civil Works — Erection of 3 Nos of 12 Meters Roof Top MARR Mast above Agri MBA bldg at SVA college Campus,Tirupati

Erection of 3 Nos of 12 Meters Roof Top MARR Mast above Agri MBA bldg at SVA college Campus,Tirupati

Circle: Andhra Pradesh

Unit / SSA: CHITTOOR

Department: Civil Works

Tender number: Erection of 3 Nos of 12 Meters Roof Top MARR Mast above Agri MBA bldg at SVA college Campus,Tirupati

Issued by Bharat Sanchar Nigam Ltd. (BSNL), Government of India.

— From the tender document (NIQ07SVATPT.pdf): Description of item Quantity Rate UNIT AMOUNT 1 Providing and laying in position excluding the cost of centering and shuttering - All work up to plinth

sources: 4 graded stone aggregate

20 mm nominal size derived from posts and struts, etc. above plinth

sources: 3 graded stone aggregate

derived from natural sources) 2.00 Cum Cum Abutments,Posts and struts. 9.00 Sqm Sqm 4 Steel reinforcement for R.C.C. work of grade Fe-500D or more. 80.00 Kgs Kgs 5 Smooth finishing of the exposed surface of R.C.C./ CC work with 6

mm thick cement mortar 1: 3 (1

cement: 3 fine sand). 11.00 Sqm Sqm

6 Structural steel work riveted, bolted or welded in built up sections, and applying a priming coat of approved steel primer all complete. 30.00 Kgs Kgs 7 Finishing walls with Acrylic Smooth

exterior paint of required shade:

a New work (Two or more coat applied @ 1.67 ltr/10 sqm over and primer applied @ 0.90 litre/10 sqm) 11.00 Sqm Sqm 8 Painting with synthetic enamel paint a Two or more coats on new work. 82.00 Sqm Sqm stacking of steel bars and disposal of metres lead as per direction of Engineer - in- charge. 0.50 Cum Cum 10 Mechanical transportation of 3 Nos of 12 M MARR Masts with angles, tubes, bolts and nuts including all terrace of floor 3 level and stacking at site from specified place to place of work lead, complete as per directions of the Engineer in charge. (Nothing extra shall be paid over and above the rate on any account). a Within the lead of 20.00 KM. 11 Erection of 12 M MARR Masts with angles, tubes and bolts and nuts welding if any etc. hire charges of department at no cost is responsible for accidents damages etc. during or after execution of the work. the work should be carried out as per 12 Supplying and fixing of galvanised high tension grip bolts and nuts of grade 5.6 and of required size coating not less than 610 gms per