EPP III Cables & Conduits — Miscellaneous Electric Power and Distribution Equipment
Issued by DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA LAND · DLA LAND ABERDEEN · DLA LAND AT ABERDEEN · via SAM.gov — US federal contract opportunities
- Published
- 9 Nov 2026
- Closes
- 23 Nov 2026, 22:00 UTC
- Reference
- SPRBL1-27-R-A006
- Location
- MD, United States
- Sector
- Electrical Equipment
This notice was amended
Details changed after publication. Re-check the official notice before bidding.
- Submission deadline changed from 6 Nov 2026, 22:00 UTC to 23 Nov 2026, 22:00 UTCFirst seen by FreeTender on 10 Nov 2026 — most portals don’t publish when a corrigendum was issued.
At a glance
DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA LAND · DLA LAND ABERDEEN · DLA LAND AT ABERDEEN in United States has published a tender in electrical equipment: “EPP III Cables & Conduits — Miscellaneous Electric Power and Distribution Equipment”. Submissions close on 23 November 2026, 13 days from today. Quote reference SPRBL1-27-R-A006 in any correspondence with the buyer. FreeTender has recorded 11 notices from this buyer since 2026, 6 of them currently open. There are 418 open electrical equipment notices in United States on FreeTender. Bids are submitted to the buyer through SAM.gov — US federal contract opportunities, not through FreeTender.
Key requirements
Taken from the notice by FreeTender. The tender document on the official portal is binding — check it, and any corrigendum, before you bid.
To bid on SAM.gov (US federal)
You need an active SAM.gov entity registration with a Unique Entity ID (UEI) to be awarded a federal contract. Check the set-aside and NAICS size standard before you respond.
Details
DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA LAND · DLA LAND ABERDEEN · DLA LAND AT ABERDEEN is soliciting EPP III Cables & Conduits — Miscellaneous Electric Power and Distribution Equipment. Solicitation number SPRBL1-27-R-A006 . Classified under NAICS 335999 — All Other Miscellaneous Electrical Equipment and Component Manufacturing. Product/service code 6150 — MISCELLANEOUS ELECTRIC POWER AND DISTRIBUTION EQUIPMENT. Place of performance: MD, USA. Responses are due by 23 November 2026 22:00 UTC. Posted on SAM.gov, the US federal contract opportunities system; registration is required to bid.
This is a Request for Proposal (RFP) for a 5-Year Firm-Fixed Price (FFP), hardware, Indefinite Quantity (IDIQ) contract. This RFP is for the items listed below and total Best Estimated Quantity (BEQ):
Hardware:
NSN: 6150-12-343-3731 Nomenclature: Cable Assembly, Spec Part Number: 180-01-0501, total BEQ: 27
NSN: 6150-12-343-3732 Nomenclature: Cable Assembly, Spec Part Number: 180-01-0504, total BEQ: 12
NSN: 6150-12-343-3733 Nomenclature: Cable Assembly, Spec Part Number: 180-01-0058, total BEQ: 36
NSN: 6150-12-343-3734 Nomenclature: Cable Assembly, Spec Part Number: 180-01-0502, total BEQ: 25
NSN: 6150-12-343-3735 Nomenclature: Cable Assembly, Spec Part Number: 180-01-0503, total BEQ: 21
NSN: 6150-12-343-3736 Nomenclature: Cable Assembly, Spec Part Number: 180-01-0050, total BEQ: 21
NSN: 6150-12-343-3737 Nomenclature: Cable Assembly, Spec Part Number: 180-01-0505, total BEQ: 195
NSN: 6150-12-343-3738 Nomenclature: Cable Assembly, Spec Part Number: 180-01-0148, total BEQ: 150
NSN: 6150-12-343-3739 Nomenclature: Cable Assembly, Spec Part Number: 180-01-0149, total BEQ: 21
NSN: 5975-12-343-4086 Nomenclature: Conduit Assembly, Part Number: 115-02-0016, total BEQ: 13
NSN: 5975-12-343-4089 Nomenclature: Conduit Assembly, Part Number: 115-02-0010, total BEQ: 13
NSN: 8130-12-358-4625 Nomenclature: Reel Cable, Part Number: 480-02-0047, total BEQ: 17
NSN: 5945-01-577-2614 Nomenclature: Relay, Hybrid Part Number: 335-01-0040, total BEQ: 60
NSN: 5975-12-343-4088 Nomenclature: Conduit Assembly Part Number: 115-02-0006, total BEQ:
Please reference attached solicitation along with the attachment, Exhibit A, for all guidance and processes needed for submission.. If you have any questions, please contact Matthew Crouch (443) 417-6972, or Matthew.crouch@dla.mil. Amendment 0001 was required to make the following changes as follows: 1. Amend the solicitation to correct the closing date. Also, to update the Packaging/packing shall be in accordance with MIL-STD-2073-1E w/ Chg 1 to MIL-STD-2073-1E w/ Chg4. Please reference attached amendment 0001 for both changes.
2. To provide the following Question and Answers as follows
Q&A: Section L permits identifying NSNs that cannot be bid, but states only one contract will be awarded. Can an otherwise compliant offer covering fewer than all 14 NSNs receive award? For a distributor supplying approved Vincorion CAGE 1VD61 parts, what manufacturer authorization/traceability evidence is required, and which quality-system obligations must be met by the reseller versus the manufacturer? It can be proposed to part or all of the solicitation (unless we state in the solicitation it is all or nothing) We will evaluate upon receipt. As to traceability, it would be the same for counterfeit part traceability and show what manufacturers are using to submit the cable some of those connectors are manufactured in Europe and not by Vincorian solely. Q&A: Section L discusses mandatory FAT plan, report and sample pricing, but Section B appears to contain production CLINs 1001–5014 and data ELINs A001/B001 under CLIN 9000, without corresponding FAT CLINs. Does FAT apply? If so, please provide quantities, schedule, pricing lines and waiver criteria. Should A001/B001 be separately priced or NSP, and how will their costs enter evaluation? There is no FAT plan for this requirement. For CLINs A001/B001, they should be NSP and then it would be evaluated inside of the price as a total. Q&A: The TRD references a CECOM G2 Antiterrorism/OPSEC/Security Cybersecurity Review Cover Sheet, which was not located in the two supplied files. Please provide it and confirm any applicable offeror CMMC requirement or assessment level, in addition to the incorporated NIST assessment provision. This is an internal Government documentation completed by our mission partner as reference. This is not part of the RFP. Amendment 0002 was required to make the following changes as follows: The purpose of amendment 0002 is to extend the offer acceptance date to November 23, 2026. Reference attached amendment 0002 as guidance.
Context for bidders
We hold 11 notices from DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA LAND · DLA LAND ABERDEEN · DLA LAND AT ABERDEEN, going back to August 2026 — 6 of them still open. They buy mostly in Manufacturing & Supply, Electrical Equipment and Electronics & Semiconductors. There are 418 open Electrical Equipment tenders in United States. This one closes in 13 days.
More from this buyer
- AFOCAL Lens — Optical Instruments· closes 7 Dec
- Mounted Family of Computer Systems (MFoCS) Block II Hardware Spares for the Joint Battle Command Platform (JBC-P)· closes 30 Nov
- Light Interference Filter (LIF) — Night Vision Equipment, Emitted and Reflected Radiation· closes 27 Nov
- Light Interference Filter (LIF)-support the Enhanced Night Vision Goggles (ENVG PSQ-20B)· closes 1 Dec
- RFQ: SUPPORT, ELECTRIC MOTOR supporting the Common Sensor Payload (CSP)· closes 8 Dec
Similar Electrical Equipment tenders
- Portable Solar Generator — Generators and Generator Sets, Electrical· closes 12 Nov
- Power Supply, in Repair/Modification of — Converters, Electrical, Nonrotating· closes 10 Dec
- Controller Adacs — Electrical Control Equipment· closes 30 Nov
- Wiring Harness, Branche — 16 each, NSN 6150016699920· closes 17 Nov
- Motor, Alternating Curr — 1 each, NSN 6105014213597· closes 24 Nov
Before you bid on this tender
A quick checklist to help you decide whether to bid and prepare a compliant submission for this electrical equipment opportunity. Always verify the details on the official source.
- Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
- Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
- Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
- Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
- Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
- Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.
More Electrical Equipment tenders
- Improvement of Internal - External Electrification in EE(Civil) Building Greater Kailash Office Complex in Greater Kailash Constituency AC-50.Delhi Jal Board · Delhi Jal Board · EE (E and M) M-12 · India
- RMO various E M services in various Delhi Govt. Offices under AE (E) EMSD III, South East, Sunlight Colony, New Delhi. Sh Providing and fixing RO system with water cooler and UPS in Sub Division SER 14Public Works Department · CE/SE/M4-M45 · EE/M452 · India
- Procurement of Facilities Management and 24/7 Operation, Inspection, Preventive Maintenance/Routine Servicing & Eventual Repairs of Mechanical, Plumbing and Electrical Installation Services & Equipment at New ENT Hospital, VacoasEquipment at New ENT Hospital, VacoasHEALTH · Mauritius
- Construction of Health Sub Centre at Herma AAM SC Bishramganj PHC Charilam RD Block Area under RD Bishramganj Division/SH-Providing Internal Electrification work thereof. (SOR-2021/(I/E-PWD)Chief Engineer, Rural Development Department · Superintending Engineer Circle-1, CE, RDD · Executive Engineer Western Division-2 · India
- Rate Contract Supply of Electrical Materials in Residential and NON Residential Building at Civil Line RajsamandPWD - CE AND AS · ACE-UDAIPUR-I · SE-RAJSAMAND · EE-RAJSAMAND · India
FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.
Verify & apply on the official portal →