FreeTender
Accepting bidstenderIndia

Electrical Installation Work for New Premises of SBI Next, Guwahati Assam

Issued by State Bank of India · via State Bank of India — procurement notices

Published
16 Nov 2026
Closes
26 Nov 2026
Location
LHO, GUWAHATI, India
Sector
Electrical Equipment

At a glance

State Bank of India in India has published a tender in electrical equipment: “Electrical Installation Work for New Premises of SBI Next, Guwahati Assam”. Submissions close on 26 November 2026, 9 days from today. One document is attached to this notice. FreeTender has recorded 1,226 notices from this buyer since 2026, 164 of them currently open. There are 344 open electrical equipment notices in India on FreeTender. Bids are submitted to the buyer through State Bank of India — procurement notices, not through FreeTender.

Details

P&E/2026-27/Tender/138: ELECTRICAL INSTALLATION WORK FOR NEW PREMISES OF SBI NEXT, GUWAHATI ASSAM

Sl.No. Description UOM Qty. Rate (Excl. GST) Amount (Excl. GST) 1 Main Panel: Supply and Installation,testing and commissioning of floor/wall mounted panel fabricated with 16SWG CRCA sheet. The panel shall be dust and vermin proof including internal connection with bus bar/cables up to the terminals duly painted with two coats of Seimens grey powder coated paint,danger board etc. and comprising of the following:- i) INCOMER: a) 250amp ,4P ,36KA MCCB with control fuses three LEDs R,Y,B.(APDCL) along with ammeter & Voltmeters of relevant range and selector switch, ii) OUTGOING: a) 300 amp tinned copper double busbar system with 1 no. 125A MCCB and 4 nos. 63A 4P MCCB of 36 kA No.s 1 2 APFC Panel:- Supplying, Installing, testing and commissioning of 20 kVAr APFC panel floor/wall mounted front operated totally enclosed vermin proof indoor non drowout cubical type power panel fabricated out of 16SWG thick CRCA sheet having gasketed hinged cover on each cubicle fully powder coated with suitable bus bar for connecting the capacitors, MCBs, contactors etc. wth the following accessories: A set of RYB LED indication lamp as incomer 63A TPN MCB C-type as incomer-01no., 2 no. 32A 3p contactor for 5kVAR, 4 nos. 25A 3P contactor for 2 kVAR and 2 nos. 16A 3P contactor for 1 kVAR with 4 nos. 5KVAR, 4 nos. 2KVAr and 2 no. 1KVar capacitor alongwith 7 step APFC relay. THe panel should have On/OFF push button for each capacitor with respective ON/OFF indication LED lamp No.s 1 3 Sub-main line:- Wiring in MS conduit of IS specification of Proper size with core PVC insulated stranded copper FRLSH wire 11KV grade (Finolex/Havells/Polycab/ RR Kabel/ Gloster/KEI or equivalent) and with supply ,installation, commissioning of all the materials required including proper termination, connection in complete as required from main DB to various DBs:- i) with 2 nos 2.5sq.mm and 1 no. 1.5 sqmm (1ECC) RM 240 ii) with 2 nos 6sq.mm and 1 no. 2.5 sqmm (1ECC) RM 280 iii) with 4 nos 6sq.mm and 1 no. 2.5 sqmm (1ECC) RM 50 iv) with 4 nos 10 sq.mm and 2 no. 4.0 sqmm (1ECC) RM 30 BOQ for Electrical Installation Works for new premises of SBI NeXT STATE BANK OF INDIA LOCAL HEAD OFFICE, GUWAHATI PREMISES & ESTATE DEPARTMENT GUWAHATI, ASSAM. SBI NEXT GUWAHATI Sl.No. Description UOM Qty. Rate (Excl. GST) Amount (Excl. GST) 4 Supply ,installation ,testing and commissioning of distribution board manufactures made sheet steel enclosure With the following MCBs (DB, MCB and MCCB Make - Legrands/ Havells/L&T/SIEMENS or equivalent) and connecting the same to the system. i) Computer DB, 12 way SPN double door with 40A (100mA)DP RCCB as incomer & 10 nos 10A SP MCB as outgoing. No.s 3 ii) 4way DB with 63A 4P MCCB (UPS I/P) No.s 2 iii) 4way DB with 63A 4P MCCB (UPS O/P) No.s 2 iv) 2 way DB with 40A DP MCB (UPS/LDB control) and glow sign) near exit gate No.s 6 vi) 4way VTPN Double Door Distribution Board with 63A 4 Pole MCCB ( 36kA) as incomer and 2 nos. 40A TP MCB 6 Nos. 25-32 A C- curve type SP MCB's at outgoing (ACDB) Set 2 vii) 6way VTPN Double Door Distribution Board with 125A 4 Pole MCCB ( 36kA) as incomer and 2 No. of 63A TP MCB, and 12 nos. 20-32A SP MCB at outgoing. All MCB should be C curve type (LPDB UPS room) Set 1 ix) Light /RAW power DB 12 way SPN double door with 32A (100mA)DP RCCB as incomer & 10 nos 10A SP MCB as outgoing. Nos. 5 x) UPS OUTGOING DB: 12 way SPN double door with 63A 4P MCB as incomer & 8 nos 32A SP MCB as outgoing. Nos. 1 5 Supplying, installing and commissioning of PVC Armored Al cable complete with proper cable glands and two nos. of 8SWG GI wire (Havell's/Finolex/RR kebel/KEI or equivalent) alongwith all the other materials required including proper connection in complete as required from main Panel, Power Distribution Board to various DBs . i) With 4 core x 35 sq. mm cable RM 110 ii) With 3.5 core x 120 sq. mm cable RM 50 6 Supply, installing and commissioning of earth station including digging and refilling back the pit with black soil and with 3.15mm x300x300mm size copper plate duly tinned through out the surface of the plate, placed at least 3.0 Mtr,below the ground level with 1no. 25x3 mm copper conductor in 40mm GI pipe, fixed to the plate and providing 40mm,3.2 mtr,long GI pipe with reducer and funnel at top for watering pipe. Set 4 7 Supplying and fixing 25x3 mm GI strip, insulated by heat pressurized heavy gauge PVC sleeve, duly jointed by full lap brazing and drawn underground in 40 mm class B GI pipe from the inspection pit to the inside of the branch premises including supply of 2 nos. tinned copper earth Busbar of 300x25x5 mm size on insulators. Mtr 80 8 Supplying and fixing 2X8 SWG dia copper earth wire in PVC conduit on surface or in recess for loop earthing from panel to DB Mtr 120 Sl.No. Description UOM Qty. Rate (Excl. GST) Amount (Excl. GST) 9 Computer/Raw Power point wiring in MS conduit of IS specification of proper size with 3nos 2.5sq.mm single core PVC insulated stranded copper wire 1.1KV grade(Finolex/Havells/Polycab/ RR Kabel/ Richa/KEI or equivalent) and with all material supply installation and commissioning complete from CDB/PDB(Raw) .The wiring shall be carried out on surface above false ceiling by chiseling the existing surface and plastering the same with cement etc. after fixing the MS conduit with all accessories like saddles screws, bends T-joint etc. 2 coats of painting Matching to the surface including supply installing, testing, commissioning of modular plate type switch and socket (Legrands / MK or equivalent) for computer terminal on sheet steel enclosure (cadmium plated),duly fitted with screw to the steel conduit and fixed to the wall partition furniture with all interconnection and proper earthing .All the opening shall be covered with blank plate and be sealed to make the box vermin proof.B48(maximum two points in single circuit) all tables except AGM, CM and Manager will have single UPS and Raw power Points i) With 3nos 6A socket with single 16A switch. No.s 24 ii) Wit

Region/Province: LHO, GUWAHATI

Published: 16-Nov-2026

Closing date: 26-Nov-2026

Issued by State Bank of India.

Context for bidders

We hold 1,226 notices from State Bank of India, going back to May 2026 — 164 of them still open. They buy mostly in Real Estate & Facilities, Financial & Professional Services and Construction & Infrastructure. There are 344 open Electrical Equipment tenders in India. This one closes in 9 days.

Explore India

Documents

Before you bid on this tender

A quick checklist to help you decide whether to bid and prepare a compliant submission for this electrical equipment opportunity. Always verify the details on the official source.

  • Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
  • Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
  • Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
  • Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
  • Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
  • Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.

Who won similar contracts

Recent contract awards in India, from published award notices.

More contract awards →

More Electrical Equipment tenders

All Electrical Equipment tenders →

FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.

Verify & apply on the official portal →