DSCR B34 & B42 System Smoke Testing & Hydro Jetting

DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DCSO · DCSO RICHMOND · DCSO RICHMOND DIVISION #1 is soliciting DSCR B34 & B42 System Smoke Testing & Hydro Jetting. Solicitation number SP470327Q0003. Classified under NAICS 236220 — Commercial and Institutional Building Construction. Product/service code Z1AA — MAINTENANCE OF OFFICE BUILDINGS. Place of performance: VA, USA. Responses are due by 20 November 2026 04:59 UTC. Posted on SAM.gov, the US federal contract opportunities system; registration is required to bid.

Combined Synopsis/Solicitation Defense Logistics Agency (DLA) B34 and B42 DWV System Smoke Testing & Hydro Jetting In accordance with executive order 14721 which requires agencies to procure commercially available products and services to the maximum extent practicable, this is a solicitation for commercially available services prepared in accordance with the format in FAR Part 12, and supplemented with additional information included in this notice  The solicitation number SP4703-27-Q-0003 is issued as a request for quotes (RFQ).  The resulting contract will be a firm-fixed price award with an expected Period of Performance of 60 days from the issuance of the Notice to Proceed. This acquisition is set-aside for 100% small businesses.  The North American Industry Classification System (NAICS) Code is 236220 (Office Buildings).  The small business size standard is $45M.  Department of Labor Wage Determination based on location of the service provided (Chesterfield County, VA).  Partial proposals will not be accepted. For an offer to be considered for award, the contractor must own, possess, or otherwise control a bona fide place of business from which mobilization occurs within 120 miles of DSCR. A bona fide place of business refers to a location where the offeror regularly maintains an office with at least one full-time employee. The offeror must include the address of this location in its bid. OBJECTIVES: The Contractor shall provide all labor, supervision, materials, equipment, and incidentals necessary to perform smoke testing, hydro jetting and evaluations of the drain, waste and vent system. BACKGROUND: Buildings 34 and 42 has experienced an intermittent sewer odor throughout the facilities. The Government requires a comprehensive evaluation of the Drain, Waste, and Vent system to identify potential defects, leaks, obstructions, improper connections, and other deficiencies contributing to the odor. No repairs are authorized under this contract. The purpose of this effort is to document the existing condition of the entire DWV system and provide recommendations for future corrective actions.

SPECIFIC REQUIREMENTS: Perform a complete smoke test of the entire DWV systems.

o The Contractor shall introduce a non-toxic, non-staining plumbing smoke, or another industry approved standard testing medium, into the DWV systems. o The smoke used shall be specifically manufactured and intended for plumbing system testing. o If an alternative testing method is proposed, the Contractor shall obtain written approval from the PM prior to use and demonstrate that the method provides an equivalent level of leak detection. o Identify and document all locations where smoke is observed. o The Contractor shall hydro jet the entire accessible sanitary drain systems, including horizontal mains, branch lines, building sewer and vertical stacks where practical. o The Contractor shall perform a CCTV inspection of the entire accessible DWV systems and provide a USB thumb drive with footage of the inspection. o Provide a comprehensive written inspection report and a summary of smoke test findings and a complete hydro jetting report. o No repairs shall be performed under this contract. o If conditions requiring repairs are identified, the Contractor shall document the deficiency and include the location and recommend corrective action in the final report. o Due to building occupancy, all work shall be performed after normal business hours. o Normal business hours are between 0600-1800, Monday-Friday. Reference Statement of Work (SOW) for additional work scope and details. Award will be made to the lowest priced, technically acceptable (LPTA) offeror that meets the requirements stated in the Statement of Work and the solicitation. Also refer to clauses and provisions includes in this notice.  Past performance will be considered a part of Technical Acceptability, and the Contracting Officer will pull contractor data from CPARS and SPRS. The contractor must be registered in the System for Award Management (SAM) prior to award.  If not already registered in SAM, go to the SAM website www.sam.gov to register prior to submitting your quote. Site visit will be held at Building 34 and 42 on November 5, 2026 at 10:00am. Contact Orville (Ramey) R. Massey Jr. at (804) 921-6694 or Orville.Massey@dla.mil to coordinate site access. Questions are due on November 12, 2026, end of day. Submit questions via email to Justin.1.Jones@dla.mil. Quotes are due on November 19, 2026, end of day. Acceptable method of quote or inquiries submission is email to justin.1.jones@dla.mil. Access to Defense Supply Center Richmond is dictated by the language at the following location:

https: //www.dla.mil/Aviation/Installation/Visitors-and-ID-Office/

The points of contact (POC) for this requirement is Justin Jones (justin.1.jones@dla.mil). Reference Attachment 1 - Statement of Work (SOW) for additional work scope and details. See Attachment 2 – Wage Determination. See Attachment 3 - Addendum to RFP - Offer Requirements A new system will be implemented on 3 January 2023 to screen visitors and contractors for installation access at DSCR.  The new system is designed to increase efficiencies, enhance the protection of personal information during the vetting process and eliminate the use of hard copy DLA Form 1815s. The new screening system will require visitors and contractors to pre-enroll in DBIDS (Defense Biometric Identification System).  To begin the process, visitors and contractors will complete registration through the pre-enrollment website: https://dbids-global-enroll.dmdc.mil. Upon entry of their information, visiting personnel will be provided an electronic form to download, which will have an individualized barcode and alpha numeric code.  The codes will be electronically sent to the visiting person’s sponsor.  Once in receipt of the barcode, the sponsor will email Security and Emergency Services and provide the barcode and sponsorship information.  Once the visitor/contractor is vetted and approved for installation access, Security & Emergency Services will notify the sponsor that the visitor/contractor can go to the DSCR Visitor Center to obtain his/her pass.  At the Visitor Center, the visitor provides the barcode and code provided earlier in the process and completes the credentialing process. LIMITATIONS ON SUBCONTRACTING (FEB 2023) (DEVIATION 2021-O0008)  (a)  This clause does not apply to the unrestricted portion of a partial set-aside.  (b)  Definition.  Similarly situated entity, as used in this clause, means a first-tier subcontractor, including an independent contractor, that—   (1)  Has the same small business program status as that which qualified the prime contractor for the award (e.g., for a small business set-aside contract, any small business concern, without regard to its socioeconomic status); and    (2)  Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.   (c)  Applicability.  This clause applies only to—    (1)  Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);    (2)  Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);    (3)  Contracts that have been awarded on a sole-source basis in accordance with subparts 19.8, 19.13, 19.14, and 19.15;    (4)  Orders expected to exceed the simplified acquisition threshold and that are—   (i)  Set aside for small business concerns under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or   (ii)  Issued directly to small business concerns under multiple-award contracts as described in 19.504(c)(1)(ii);   (5)  Orders, regardless of dollar value, that are—    (i)  Set aside in accordance with subparts 19.8, 19.13, 19.14, or 19.15 under multiple award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or    (ii)  Issued directly to concerns that qualify for the programs described in subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 19.504(c)(1)(ii); and   (6)  Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference. (d)  Independent contractors. An independent contractor shall be considered a subcontractor.  (e)  Limitations on subcontracting.  By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North American Industry Classification System (NAICS) code for—   (1)  Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding certain other direct costs and certain work performed outside the United States (see paragraph (e)(1)(i)), to subcontractors that  are not similarly situated entities.  Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 50 percent subcontract amount that cannot be exceeded.  When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract.  The following services may be excluded from the 50 percent limitation:     (i)  Other direct costs, to the extent they are not the principal purpose of the acquisition and small business concerns do not provide the service.  Examples include airline travel, work performed by a transportation or disposal entity under a contract assigned the environmental remediation NAICS code 562910), cloud computing services, or mass media purchases.     (ii)  Work performed outside the United States on awards made pursuant to the Foreign Assistance Act of 1961, or work performed outside the United States required to be performed by a local contractor.   (2)  Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities.  Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 50 percent subcontract amount that cannot be exceeded.  When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;   (3)  General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities.  Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 85 percent subcontract amount that cannot be exceeded; or   (4)  Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities.  Any work that a similarly situated entity further subcontracts will count towards the prime contractor’s 75 percent subcontract amount that cannot be exceeded.  (f)  The Contractor shall comply with the limitations on subcontracting as follows:   (1)  For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause–  [Contracting Officer check as appropriate.]  __ By the end of the base term of the contract and then by the end of each subsequent option period; or  __ By the end of the performance period for each order issued under the contract.   (2)  For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.  (g)  A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.  (1)  In a joint venture comprised of a small business protégé and its mentor approved by the Small Business Administration, the small business protégé shall perform at least 40 percent of the work performed by the joint venture.  Work performed by the small business protégé in the joint venture must be more than administrative functions.  (2)  In an 8(a) joint venture, the 8(a) participant(s) shall perform at least 40 percent of the work performed by the joint venture.  Work performed by the 8(a) participants in the joint venture must bemore than administrative functions. (End of clause) **********************ADDITIONAL INFORMATION******************************* A site visit will be held 11/05/2026 @1000.  See p.45 of SOW for map for location of DSCR Building 34 & 42 In order to attend the site visit interested parties MUST follow the instructions below no less than 5 business days prior to the site visit.. Plan on arriving at DSCR an hour prior to the site visit time, as the processing time through the visitor center fluctuates.  Follow the link below to register through DBIDS, and a QR code should be provided for each visitor.  The QR codes MUST be emailed to the Project Manager, Orville (Ramey) R. Massey Jr., Orville.Massey@dla.mil. (Work Cell: [contact details removed].  The QR code MUST be emailed to the project manager no less than three working days prior to the site visit. The project manager will also serve as the sponsor for site visit attendees. A new system was implemented on 3 January 2023 to screen visitors and contractors for installation access at DSCR. The new system is designed to increase efficiencies, enhance the protection of personal information during the vetting process and eliminate the use of hard copy DLA Form 1815s.  The new screening system will require visitors and contractors to pre-enroll in DBIDS (Defense Biometric Identification System). To begin the process, visitors and contractors will complete registration through the pre-enrollment website:

https: //dbids-global-enroll.dmdc.mil.

Upon entry of their information, visiting personnel will be provided an electronic form to download, which will have an individualized barcode and alpha numeric code. The codes need to be sent to the visiting person’s sponsor. Once in receipt of the barcode, the sponsor will email Security and Emergency Services and provide the barcode and sponsorship information. Once the visitor/contractor is vetted and approved for installation access, Security & Emergency Services will notify the sponsor that the visitor/contractor can go to the DSCR Visitor Center to obtain his/her pass. At the Visitor Center, the visitor provides the barcode and code provided earlier in the process and completes the credentialing process.”