FreeTender
Accepting bidstenderIndia

Design, Realization, Testing and Commissioning (at VSSC) of Hydraulic Proof load test setup for VTVL Components

Issued by Indian Space Research Organisation (ISRO) · via ISRO — e-procurement tenders

Published
12 Oct 2026
Closes
11 Nov 2026, 15:00 UTC
Reference
VS202600348901
Location
India
Sector
Manufacturing & Supply

At a glance

Indian Space Research Organisation (ISRO) in India has published a tender in manufacturing & supply: “Design, Realization, Testing and Commissioning (at VSSC) of Hydraulic Proof load test setup for VTVL Components”. Submissions close on 11 November 2026, 30 days from today. Quote reference VS202600348901 in any correspondence with the buyer. FreeTender has recorded 342 notices from this buyer since 2026, 149 of them currently open. There are 302 open manufacturing & supply notices in India on FreeTender. Bids are submitted to the buyer through ISRO — e-procurement tenders, not through FreeTender.

Details

Design, Realization, Testing and Commissioning (at VSSC) of Hydraulic Proof load test setup for VTVL Components

GOVERNMENT OF INDIA DEPARTMENT OF SPACE VIKRAM SARABHAI SPACE CENTRE (VSSC) THIRUVANANTHAPURAM Tender for Design, Realization, Testing and Commissioning (at VSSC) of Hydraulic Proof load test setup for VTVL Components Bids to be submitted online Tender No.: VSSC/PURCHASE UNIT-IV (MVIT)/VS202600348901 dated 12-10-2026 Tender No : VSSC/PURCHASE UNIT-IV (MVIT)/VS202600348901 Page 1 of 22 A. Tender Details Design, Realization, Testing and Commissioning (at VSSC) of Hydraulic Proof load test setup for VTVL Components Please quote as per the following terms and conditions before the due date. Clarifications, if any shall be sought before the clarification date mentioned below. Last minute clarification on tender/extension of due date of tender will not be entertained. Quotation/Open Authorization shall be submitted online [only] complying the specified schedule with technical specifications, including datasheets, pamphlets, catalogues etc. If a vendor is not able to submit bid against this tender due to any reason, such vendor is requested to post their REGRET message in the e-procurement portal with clear reasons or email to [contact details removed]. Non-submission of bids without regrets will be viewed seriously. A.1 Tender Schedule Tender No : VSSC/PURCHASE UNIT-IV (MVIT)/VS202600348901 Tender Date : 12-10-2026 Tender Classification: GOODS Purchase Entity : PURCHASE UNIT-IV (MVIT) Centre : VIKRAM SARABHAI SPACE CENTRE (VSSC) Bid Submission Start Date : 12-10-2026 17:00 Bid Clarification Due Date : 19-10-2026 12:00 Bid Submission Due Date : 11-11-2026 15:00 Bid Opening Date : 11-11-2026 15:30 Price Bid Opening Date : 11-12-2026 10:00 Tender No : VSSC/PURCHASE UNIT-IV (MVIT)/VS202600348901 Page 2 of 22 B. Tender Attachments NA Instructions To Vendors 1. Instructions to Vendors 1. Last minute clarification on tenders will not be entertained. 2. This is an E Tender. Hence Postal/Fax/Email tenders will not be accepted. 2. Specific Terms and Conditions to Tender (MII Compliant) 1. Foreign OEMs/Agents quoting on behalf of Foreign OEMs are not permitted to quote. High Sea Sales Quotes not permitted. The bids shall be in INR only. 2. Please quote applicable GST separately. For Goods under schedule II with GST @ 18%, VSSC is eligible for concessional rate of tax @ 5% under Sl.No.462 (Chapter 88 or any other Chapter) of Schedule-I of Notification No.09/2025 Central Tax (Rate) dated 17.09.2025 & IGST in term of Notification No.09/2025 - Integrated Tax (Rate) dated 17.09.2025. Necessary IGST/ CGST/ SGST concession certificate shall be issued by us. [Please Specify the rates with HSN Code]. 3. Our standard delivery term is FOR, VSSC. In case any vendor offers delivery term of Ex-works, Packing and Forwarding charges if any should be indicated separately either as a percentage of the quoted rate or as a Lumpsum amount. 4. Our standard payment term is 100% within 30 days after receipt and acceptance of the items at our site (after installation and commissioning in cases where installation and commissioning is required). 5. Liquidated Damages @ 0.5% per week of delay or part thereof subject to maximum of 5% of order value including elements of GST, freight & statutory variation is applicable beyond the promised delivery schedule. However, in case of inordinate delay of more than one-fourth in completion period, LD subject to a maximum of 10% of the total order value shall be recovered. Wherever, installation and commissioning is also involved, the supply will be deemed to have been completed only when the entire Stores is supplied, installed and accepted. 6. Performance Bank Guarantee: Wherever products offered carry warranty, the warranty should be for one year or as per manufacturers standard warranty term. Against such cases, please confirm submission of Performance Bank Guarantee. The Performance Bank Guarantee should be for 3% of Tender No : VSSC/PURCHASE UNIT-IV (MVIT)/VS202600348901 Page 3 of 22 the order value covering the warranty period obtained from any Commercial Bank on Rs.200/- Non Judicial Stamp Paper and should be valid beyond 2 months from the completion of the warranty period. Alternately vendors can request for withholding 3% payment till completion of the warranty period. 7. Security Deposit: Wherever the offer value is Rs. 5.00 Lakhs or above, the successful tenderer should submit Security Deposit @ 3% of the order value by way of Bank Guarantee / FD Receipt/ account payee DD/ Insurance Surety Bond. The Bank Guarantee shall be obtained from any Commercial Bank on Rs.200/- Non Judicial Stamp Paper and should be valid beyond 2 months from the completion of all contractual obligations. If the Contractor is called upon by the Purchaser to deposit, Security and the Contractor fails to provide the security within the period specified, such failure shall constitute a breach of the Contract, and the Purchaser shall be entitled to make other arrangements for the re-purchase of the stores Contracted at the risk of the Contractor. In case if Security Deposit is submitted and the contractor fails to execute the order, then the security deposit will be forfeited. 8. SD, LD and PBG clauses are mandatory and offers of the vendors who have not agreed for the above conditions will be excluded from the procurement process. Micro and Small Vendors are not exempted from the submission of Security Deposit. Only Govt Departments/PSUs/PSEs can submit Indemnity Bond instead of Bank Guarantee towards SD/PBG. 9. Please upload the Technical Details / Catalogue / Data Sheets (wherever applicable) 10. The offer should be valid for a period of minimum 90 days for Single Part from the date of opening of Tender and 180 Days for PT Two Part (120 Days for Technical Bid and 60 Days for Price Bid from the date of opening). 11. In order to avail of the benefits extended to by Govt. of India to the Micro and Small Sectors, please submit attested copy of the valid Entrepreneur Memorandum Part-II signed by the General Manage

Issuing unit: VSSC

Closing date: 11-November-2026 15:00

Bid opening: 11-November-2026 15:30

Issued by Indian Space Research Organisation (ISRO).

Context for bidders

We hold 342 notices from Indian Space Research Organisation (ISRO), going back to August 2026 — 149 of them still open. They buy mostly in space-satellite, electronics-semiconductors and Manufacturing & Supply. There are 302 open Manufacturing & Supply tenders in India. This one closes in 30 days.

Before you bid on this tender

A quick checklist to help you decide whether to bid and prepare a compliant submission for this manufacturing & supply opportunity. Always verify the details on the official source.

  • Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
  • Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
  • Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
  • Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
  • Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
  • Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.

More Manufacturing & Supply tenders

All Manufacturing & Supply tenders →

FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.

Verify & apply on the official portal →