Combined Synopsis/Solicitation – Compunetix TDI-13II Mission Voice Consoles and Peripherals
Issued by DEPT OF DEFENSE · DEPT OF THE AIR FORCE · AIR FORCE MATERIEL COMMAND · AIR FORCE TEST CENTER · FA9302 AFTC PZZ · via SAM.gov — US federal contract opportunities
- Published
- 11 Sept 2026
- Closes
- 16 Sept 2026, 19:00 UTC
- Reference
- F1S0AZ6239A002
- Location
- CA, United States
- Sector
- Manufacturing & Supply
Details
DEPT OF DEFENSE · DEPT OF THE AIR FORCE · AIR FORCE MATERIEL COMMAND · AIR FORCE TEST CENTER · FA9302 AFTC PZZ is soliciting Combined Synopsis/Solicitation – Compunetix TDI-13II Mission Voice Consoles and Peripherals. Solicitation number F1S0AZ6239A002. Classified under NAICS 334220 — Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing. Product/service code 5895 — MISC COMMUNICATION EQ. Place of performance: CA, USA. Responses are due by 16 September 2026 19:00 UTC. Posted on SAM.gov, the US federal contract opportunities system; registration is required to bid.
1. DESCRIPTION OF REQUIREMENT
This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in RFO Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The Air Force Test Center (AFTC/PZZF), Edwards AFB, CA, intends to award a firm-fixed-price (FFP) commercial purchase order for the following brand-name Compunetix, Inc. components to support the Next Generation Air Dominance (NGAD) project within Mission Control Room (MCR) 160:
- Line Item 0001: TDI-13II R/B GTX Console (Qty: 27) | P/N: 00-6611-0936
Includes 13-inch touch display and SDAP with power adapter. Red/Black variant without integral handset and speaker.
- Line Item 0002: EPOS HME 46 Dual Channel Headset Top (Qty: 54) | P/N: P13-1502-0038
- Line Item 0003: EPOS Headset Base, Polarized, Single PTS, 15-foot Non-Locking Cord (Qty: 54) | P/N: 13-1502-0039-NL-15
2. SOLE SOURCE AUTHORITY AND JUSTIFICATION
The proposed contract action is for commercial products for which the Government intends to solicit and negotiate with only one source under the authority of RFO Part 12 (Simplified Acquisition Procedures for Commercial Products below the Simplified Acquisition Threshold). The proprietary Compunetix hardware and TDI-13II touchscreen consoles are technically necessary to integrate natively with the existing Range Communication System (RASS) voice distribution switching architecture at Edwards AFB. These specific hardware models are currently certified, accredited, and baseline-integrated under the existing RASS Authority to Operate (ATO). The introduction of non-certified or non-interoperable hardware would invalidate the RASS ATO, introduce unacceptable mission risk, and cause severe schedule delays to active flight test programs. Compunetix, Inc. (CAGE: 8C319) is the Original Equipment Manufacturer (OEM) of this proprietary hardware and does not utilize third-party authorized distributors or resellers for this specialized product line.
3. INSTRUCTIONS TO INTERESTED PARTIES
This notice of intent is not a competitive request for competitive proposals; however, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Capability statements must demonstrate the vendor’s ability to provide identical, form-fit-and-function, OEM-certified Compunetix components that natively interface with the existing VCSU switching matrix and maintain compliance with the RASS ATO security baseline without modification. Responses must be submitted electronically via email to Contract Specialist Christina M. Day at [contact details removed]. All capability statements, quotations, or proposals must be received no later than September 16, 2026, at 12:00 PM PDT. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government.
4. CONTRACT CLAUSES
The following provisions and clauses apply to this acquisition and are incorporated by reference: - RFO 52.212-1, Instructions to Offerors – Commercial Products and Commercial Services - RFO 52.212-3, Offeror Representations and Certifications – Commercial Products and Commercial Services - RFO 52.212-4, Contract Terms and Conditions – Commercial Products and Commercial Services [END OF NOTICE]
Context for bidders
We hold 15 notices from DEPT OF DEFENSE · DEPT OF THE AIR FORCE · AIR FORCE MATERIEL COMMAND · AIR FORCE TEST CENTER · FA9302 AFTC PZZ, going back to August 2026 — 10 of them still open. They buy mostly in Manufacturing & Supply, electronics-semiconductors and Education & Training. There are 3,195 open Manufacturing & Supply tenders in United States. This one closes in 5 days.
More from this buyer
- Vinyl Shelters / Sunshades-RAMP 7 — Prefabricated & Portable Buildings· closes 22 Sept
- Military Tandem Course — Other ED & Trng Svcs· closes 18 Sept
- Brand Name Or Equal SLICE6 Data Acquisition System· closes 15 Sept
- VHF/UHF Transceivers & CM-350 V2 RCU (SDVOSB Set-Aside)· closes 14 Sept
- Sole Source - Combined Pre-solicitation Parachutist Oxygen System· closes 15 Sept
Similar Manufacturing & Supply tenders
- USCG MAT Portsmouth Air Compressor — Compressors and Vacuum Pumps· closes 16 Sept
- Shaft, Shouldered — 248 each, NSN· closes 21 Sept
- Bearing, Ball, Thrust — 149 each, NSN· closes 18 Sept
- Washer, Flat — 311 each, NSN· closes 25 Sept
- Nut, Self-Locking, Exten — 379 each, NSN· closes 25 Sept
Before you bid on this tender
A quick checklist to help you decide whether to bid and prepare a compliant submission for this manufacturing & supply opportunity. Always verify the details on the official source.
- Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
- Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
- Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
- Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
- Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
- Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.
More Manufacturing & Supply tenders
- Bens: Fornecimento de CadeirasDIRECCAO PROVINCIAL DE CULTURA E TURISMO DE INHAMBANE · Mozambique
- Tender for Purchase of Furniture Items in BMC SagarDirectorate of Medical Education · Bundelkhand Medical College - Sagar · India
- Invitation of Tenders for supply and delivery of Stationary and Office Supplies to National Government Constituency Development Fund- Keiyo North Constituency on As and When required basis for the period ending 30th JuneNG-CDF KEIYO NORTH · Kenya
- Repair of Pumping Machinery, electrical control panel board, starter, cableHaryana Government · Engineer- in- Chief PHED Panchkula · Sonipat Circle · Sonipat PHED No. 2 · India
- Repair of Pumping Machinery electeical control panel board strater cableHaryana Government · Engineer- in- Chief PHED Panchkula · Sonipat Circle · Sonipat PHED No. 2 · India
FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.
Verify & apply on the official portal →