Circuit Card Assemb — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
Issued by DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA AVIATION · DLA AVIATION PHILADELPHIA · DLA AVIATION AT PHILADELPHIA, PA · via SAM.gov — US federal contract opportunities
- Published
- 16 Nov 2026
- Closes
- 14 Dec 2026, 20:30 UTC
- Reference
- SPRPA127QZA46
- Location
- United States
- Sector
- Electronics & Semiconductors
At a glance
DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA AVIATION · DLA AVIATION PHILADELPHIA · DLA AVIATION AT PHILADELPHIA, PA in United States has published a tender in electronics & semiconductors: “Circuit Card Assemb — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware”. Submissions close on 14 December 2026, 28 days from today. Quote reference SPRPA127QZA46 in any correspondence with the buyer. FreeTender has recorded 522 notices from this buyer since 2026, 175 of them currently open. There are 739 open electronics & semiconductors notices in United States on FreeTender. Bids are submitted to the buyer through SAM.gov — US federal contract opportunities, not through FreeTender.
Key requirements
Taken from the notice by FreeTender. The tender document on the official portal is binding — check it, and any corrigendum, before you bid.
To bid on SAM.gov (US federal)
You need an active SAM.gov entity registration with a Unique Entity ID (UEI) to be awarded a federal contract. Check the set-aside and NAICS size standard before you respond.
Details
DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA AVIATION · DLA AVIATION PHILADELPHIA · DLA AVIATION AT PHILADELPHIA, PA is soliciting Circuit Card Assemb — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware. Solicitation number SPRPA127QZA46. Classified under NAICS 334412 — Bare Printed Circuit Board Manufacturing. Product/service code 5998 — ELECTRICAL AND ELECTRONIC ASSEMBLIES, BOARDS, CARDS, AND ASSOCIATED HARDWARE. Responses are due by 14 December 2026 20:30 UTC. Posted on SAM.gov, the US federal contract opportunities system; registration is required to bid.
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X|||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT COMBO|N/A|TBD|SPRPA1|TBD|TBD|SEE SCHEDULE|TBD|N/A|N/A|TBD|N/A|N/A|N/A|N/A|N/A| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|ROBYN.GRINARML@DLA.MIL| VALUE ENGINEERING (JUN 2020)|3|||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|1 YEAR AFTER DATE OF DELIVERY|45 DAYS AFTER DISCOVERY OF THE DEFECT||||| SMALL BUSINESS SUBCONTRACTING PLAN (DEV 2026-O0037)(FEB 2026)|4||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2||| CRITICAL SAFETY ITEMS (AUG 2011)|4|NIIN 015191467|||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIED COST OR PRICING DATA --MODIFICATIONS (DEV 2026-O0048)(MAR 2026))|7|||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| COST ACCOUNTING STANDARD NOTICES AND CERTIFICATION (DEV 2026-O0006)(FEB 2026)|1|| REQUIREMENTS FOR SUBMISSION OF PROPOSALS VIA ELECTRONIC MEDIA (JAN 2018)|1|ELECTRONIC MAIL| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| NO DRAWINGS ARE AVAILABLE FOR THIS REQUEST FOR QUOTATION. NAICS CODE: 334412 SMALL BUSINESS SIZE STANDARD: 750 THIS IS A CRITICAL SAFETY ITEM (CSI). \ 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS The contractor shall maintain a quality control system which meets the requirements of Mil-I-45208A, Mil-Q 9858,ISO-9000 / 9001 / 9002 or equivalent. RESPONSIBILITY FOR INSPECTION: Unless otherwise specified, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified, the contractor may use his own or any other facility suitable for the performance of the inspection requirements specified herein. PROCEDURES:The contractor shall prepare and maintain Quality Control Documentation, test and repair procedures, and inspection procedures which shall be made available to the Government for review and approval. The procedures shall include sequential diagrams of the test, repair, and inspection process, as well as the performance spcifications to perform the procedures. QUALITY ASSURANCE PROGRAM PLAN: The contractor shall develop, implement and maintain a Repair Quality Plan in compliance with the requirements of Mil-I-45208A, Mil-Q-9858, ISO,9000 / 9001 / 9002, or equvalent.The plan shall define the specific methods by which compliance with contractual requirements will be assured. All quality assurance data shall be provided to the Government for review and approval upon request. PURCHASED MATERIAL CONTROL: The contractor shall establish and maintain a system of control over purchased material which shall assure that the necessary requirements of this contract are included. in all sub contract agreements. A parts control system shall establish a record of performance for each purchased and internally manufactured part and shall be used to evaluate continued use of the source. The contractors control system shall be in compliance wil either Mil-I 45208A/Mil-Q-9858 or equivalent Quality Quality Assurance Standared.(ISO/AS:9000, 9001, 9002). RECEIVING INSPECTION OF PURCHASED MATERIAL: Purchased items shall be inspected upon receipt at the contractors facility to assure conformance with all requirements of the Technical Data Package (TDP). Evidence of such inspections shall be maintained for Government review at least twelve (12) months following acceptance of the end item. Inspection reports shall be maintained by the contractor. The inspection report shall, at a minimum, include a record of all dimensional data (coordinate/positional), material, finish, and process with appropriate pass/fail criteria, such ascertifications, and actual dimensional readings. FAILURE ANALYSIS AND CORRECTIVE ACTION:All failure analysis and corrective action reports/plans shall be submitted to the Government. NONCONFORMING MATERIAL:The contractor shall establish an effective system for controlling nonconforming material including procedures for identification, segregation, and disposition. CONTRACTOR INTERNAL REVIEW BOARD (IRB):IRB authority is delegated to the contractor for this contract only. The IRB may be used only for disposition of materials exhibiting minor non-conformances, scrap or rework to return a part to conformance with drawings or specifications as authorized by the approved repair procedures.IRB shall not use "AS-IS" disposition. A complete file of IRB actions shall be maintained for review by the Government for concurrance of classification. MATERIAL REVIEW BOARD (MRB):Formal MRB authority for disposition of "AS-IS"and for minor non-conformances is retained by the Government. The contractor shall submit the appropriate request for Variance via the DCMC to the NAVSUP Contracting Officer. RESPONSIBILITY FOR COMPLIANCE: All items must meet all requirements of this Statement of Work. The inspection requirements set forth in this SOW shall become part of the contractors overall inspection system or quality program. The absence of any inspection requirements in the SOW shall not relieve the contractor of the responsibility of assuring that all Government equipment submitted for acceptance comply with all requirements. Sampling in quality conformance does not authorize submission of known defective items, either indicated or actual, nor does it commit the procuring activity to acceptance of any defective items. REPAIR ASSESSMENT TESTING: The Government may select samples of the Contract Line Items (CLINS) which have completed repair and have been accepted by the Government representative for the purpose of conducting performance testing, environmental testing, and quality conformance examination in a repair assessment test program. A quantity of CLIN's may be randomly selected from each quaterly repair production completion for shipment to the CFA or other Government designated location to conduct this testing. RECORDS OF DATA COLLECTION: The contractor shall maintain a historical record file to contain copies of applicable data and documents for individual CLIN's and assemblies by CLIN serial number. The historical record file shall include,but not be limited to the following types of historical records: Receipt inspection documentation. Repair shop travelers or repair cards. Parts replacement records. Parts inspection data before and after repair as applicable. Acceptance test data. QA personnel shall maintain a complete receipt inspection,test, repair re-test, history card for each item processed. This information shall be made available to the Government upon request. 4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE
Context for bidders
We hold 522 notices from DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA AVIATION · DLA AVIATION PHILADELPHIA · DLA AVIATION AT PHILADELPHIA, PA, going back to August 2026 — 175 of them still open. They buy mostly in Space & Satellite, Manufacturing & Supply and Electronics & Semiconductors. There are 739 open Electronics & Semiconductors tenders in United States. This one closes in 28 days.
More from this buyer
- Support, Turbine COM — Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components· closes 14 Dec
- Interface Unit, Data — IT and Telecom - Compute: Servers (Hardware and Perpetual License Software)· closes 14 Dec
- Transmitter, Radar — Radar Equipment, Airborne· closes 14 Dec
- Control, Radio Set — Radio & TV EQ Airborne· closes 30 Nov
- Hoisting Unit — Miscellaneous Aircraft Accessories and Components· closes 14 Dec
Similar Electronics & Semiconductors tenders
- Circuit Card Assemb — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware· closes 14 Dec
- A4, I/O, Box, TI16 — Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware· closes 31 Dec
- Interface Unit, Data — IT and Telecom - Compute: Servers (Hardware and Perpetual License Software)· closes 14 Dec
- Transmitter, Radar — Radar Equipment, Airborne· closes 14 Dec
- Repair of the TH-1H Servo Con Altimeter· closes 11 Dec
Explore United States
- DEPT OF DEFENSE · DEFENSE LOGISTICS AGENCY · DLA AVIATION · DLA AVIATION PHILADELPHIA · DLA AVIATION AT PHILADELPHIA, PA: buyer profile →
- All open tenders in United States →
- Electronics & Semiconductors tenders in United States →
- United States market report, November 2026 →
- Public buyers in United States →
- Electronics & Semiconductors suppliers →
Before you bid on this tender
A quick checklist to help you decide whether to bid and prepare a compliant submission for this electronics & semiconductors opportunity. Always verify the details on the official source.
- Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
- Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
- Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
- Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
- Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
- Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.
More Electronics & Semiconductors tenders
- CSAC2335 Thermomechanical Warpage testerSemiconductor Catapult · United Kingdom
- «Закупка IT оборудования для объекта ул. Новохохловская 89с3 по заявкам 9182 и 9181ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ "ГРУППА КОМПАНИЙ ФСК" · Russia
- Плиты дробящие для ДСК на дробилку СМД 110, СМД 108 для ООО "Разрез Колыванский".ОБЩЕСТВО С ОГРАНИЧЕННОЙ ОТВЕТСТВЕННОСТЬЮ "УПРАВЛЯЮЩАЯ КОМПАНИЯ "СИБАНТРАЦИТ" · Russia
- Fabrication and Packaging of SOI Diaphragms for Miniaturized Pressure TransducersDepartment of Defence Research & Development · India
- Plug X1, Transistor 2N 6284Department of Military Affairs · India
FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.
Verify & apply on the official portal →