FreeTender
Accepting bidsitbBelgium

Belgium – Detection and analysis apparatus – Nuclear physics detectors

Issued by European Commission, DG JRC - Joint Research Centre · via TED — Tenders Electronic Daily (EU)

Published
30 Aug 2026
Closes
3 Sept 2026, 23:59 UTC
Value
EUR 4,50,000
Reference
586207-2026
Location
Belgium
Sector
Manufacturing & Supply
Type
goods

Details

The European Commission, DG Joint Research Centre in Geel intends to sign 6 framework contract for the supply (and maintenance) of detectors.

Lots Lot 1 — HPGe detectors for the Radionuclide Metrology laboratory (estimated 450000): The Radionuclide laboratories located at the premises of JRC-Geel have a long tradition of more than 57 years. The laboratories are equipped with a variety of instruments, in order to perform measurements of a large number of radionuclides in samples as diversified as reference materials, solutions for standardisation, determination of nuclear decay data and environmental samples. Among the instruments for secondary standardization of radioactivity and radiological characterisation, some of the HPGe Gamma-Ray Spectrometers will need to be replaced in the coming years. Tender consists of: 1.1 Coaxial HPGe 1.2 Small Broad energy range HPGe 1.3 Large Broad energy range HPGe 1.4 Ultra-low energy germanium detectors 1.5 Maintenance Lot 2 — Radiation damage resistant HPGe for Gains (estimated 350000): GAINS (Gamma Array for Inelastic Neutron Scattering) is a setup used for measurements of neutron inelastic cross sections at GELINA. It consists of eight high-efficiency HPGe detectors placed at 110° and 150° in close geometry around the sample. Tender consists of: 2.1 Radiation damage resistant HPGe 2.2 Maintenance Lot 3 — Liquid scintillation detectors for ELISA (estimated 130000): ELISA is a spectrometer consisting of 32 liquid organic scintillators. It is designed for measuring elastic neutron scattering cross sections and angular distributions and can also decouple elastic and inelastic channels if the level density of the nucleus under study is adequate. Half of the detectors have EJ301 (NE-213 equivalent) as the scintillation liquid while the rest have EJ315 (C 6 D 6). The current detectors are manufactured by Scionix (models 51A51/2MQOE1-EJ301 NX and 51A51/2MQOE1-EJ315-NX). The reason for using both hydrogen and deuterium-based scintillators is that it enables a cross check between the two types, which allows the determination of systematic errors during the data analysis phase. A 235U fission chamber is used for measuring the total number of neutrons intercepted by the sample. Tender consists of: 3.1 Liquid scintillation detectors for neutron discrimination 3.2 Deuterated liquid scintillation detectors Lot 4 — Cylindrical Li-6 detectors (estimated 20000): Material: Li-6 enriched glass scintillator (type GS20). Li-6 enrichment: 96% Li-6 content by weight: 7.4% Tender consists of: 4.1 Cylindrical 6-Li detector 4.2 Square 6-Li detector Lot 5 — PIPS alpha particle detectors (estimated 40000): PIPS detectors: PIPS-type, partially depleted Geometry: round Tender consists of: 5.1 PIPS alpha particle detectors 5.2 Detectors for low energy Conversion Electron Spectroscopy Lot 6 — Lanthanum Bromide scintillator-based detectors (estimated 150000): LaBr3:Ce(5%) crystal

Buyer: European Commission, DG JRC - Joint Research Centre

Buyer country: BEL

Procedure: open

CPV code: 38430000

Full notice, tender documents and how to bid are on the official TED page (link above).

Context for bidders

European Commission, DG JRC - Joint Research Centre has 0 open notices on FreeTender. There are 15 open Manufacturing & Supply tenders in Belgium. This one closes in 5 days.

Documents

Before you bid on this tender

A quick checklist to help you decide whether to bid and prepare a compliant submission for this manufacturing & supply opportunity. Always verify the details on the official source.

  • Confirm the exact closing date and time (and time zone) on the official portal — deadlines are strict and can be revised by a corrigendum.
  • Read the full notice and every attached document, including the scope, specifications and any bill of quantities or terms of reference.
  • Check the eligibility criteria — prior similar experience, annual turnover, certifications and registrations — and make sure you qualify before investing effort.
  • Prepare any earnest-money deposit (EMD) or bid security and the required formats early; missing or wrongly-formatted documents are a common cause of rejection.
  • Note how bids must be submitted (online or physical), in what format, and whether a digital signature or portal registration is required.
  • Watch for corrigenda and clarifications right up to the deadline — requirements and dates can change.

More Manufacturing & Supply tenders

All Manufacturing & Supply tenders →

FreeTender mirrors this notice for reference. Verify the details and bid on the official portal.

Verify & apply on the official portal →